3PSFPP401

現行品

Altech 3PSFPP401

Altech 3PSFPP401 — Altech 3PSFPP401

シリーズ画像: 販売者は4個の他の部品にも使用しているため、この正確なバージョンが表示されない場合があります。

Pushbutton Switches Push Button,Economy 22mm,Main.

研究ノート

1. What this is

3PSFPP401 is an Altech 3PSFP-series economy non-illuminated plastic pushbutton (protected/guarded plastic operator, 22mm).

2. Part-number decode

  • Series: Altech 3PSFP
  • Panel cutout: 22mm
  • Operator material: Plastic

3. Compatibility & ordering

Altech 22/30mm pushbuttons are cost-effective IEC-style panel operators. Match by size (22mm), operator material (metal vs plastic), illumination (and voltage), action, and contact blocks; cross-reference to Schneider Harmony, Allen-Bradley 800F, Siemens 3SU, or Eaton M22 by the same attributes if needed.

4. Data-quality note

The Altech series family is identified, but the exact operator style/contact config is not fully determinable from the part number alone — treat as indicative and confirm against Altech's datasheet. Flagged decoded-partial.

5. Sources

  • Altech Corp datasheet / 22mm pushbutton tech specs (altechcorp.com)
  • Distributor listing (Mouser / Future Electronics) — search the exact part number

出典
  1. Altech Corp — 3PSFPP401 — altechcorp.com

仕様一覧

Device class
pushbutton
Enriched by
altech-decoder-2026-08-12
Lead time
0 Days
Manufacturer series
3PSFP
Mouser part number
845-3PSFPP401
Operator material
plastic
Panel cutout
22mm
Pn status
decoded-partial
Rohs status
Series description
Altech 3PSFP-series economy non-illuminated plastic pushbutton (protected/guarded plastic operator, 22mm)

取付クイックリファレンス

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

外形寸法

トラブルシューティング

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

写真と図面

画像: mouser.com

主要仕様

Device class
pushbutton
Enriched by
altech-decoder-2026-08-12
Lead time
0 Days
Manufacturer series
3PSFP
Mouser part number
845-3PSFPP401