800F-ASM2A2-COMP
現行品800F 2-Pos Selector Complete Maintained 1NO+1NC
AB 800F complete 2-position maintained selector.
主な用途
Complete Manual/Auto selector. Pre-assembled head + body + 1NO + 1NC contacts. One Rockwell part number.
仕様一覧
|
Actuator Function
Momentary = springs back when released. Maintained/latching = stays pressed until pressed again.
|
Maintained
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Contact Configuration
1NO + 1NC: One circuit closes and one opens when pressed. Common for start buttons that also signal 'running' state.
|
1NO + 1NC
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
IP Rating
IP66: Dust-tight and withstands powerful water jets from any direction. Standard for outdoor and washdown applications.
|
IP66
|
取付クイックリファレンス
Panel cutout: 22mm. Align the selector positions with the desired panel markings before tightening.
Contact blocks: Attach one contact block per position. Wire each to a separate PLC input for position feedback. A 2-position switch needs 1-2 blocks; 3-position needs 2-3.
外形寸法
配線図
トラブルシューティング
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
主要仕様
- Actuator Function
- Maintained
- Certifications
- UL, CSA, CE
- Contact Configuration
- 1NO + 1NC
- Cutout Diameter
- 22mm
- IP Rating
- IP66
ユーザーの声
“Complete Manual/Auto selector. Pre-assembled head + body + 1NO + 1NC contacts. One Rockwell part number.”