Akko Starfish — heavy linear.
主な用途
The heaviest Akko linear at 62g. For typists who prefer firm resistance. Reduces accidental keypresses. Good for people who bottom out hard.
研究ノート
1. Overview
The Akko CS Starfish is a linear MX-style mechanical keyswitch in Akko's Custom Series, notable for a two-stage (progressive) spring that gives a distinct force curve — light early, firmer toward bottom-out. It has an orange stem, 2 mm actuation / 4 mm total travel, and is a budget-friendly smooth linear. Force figures vary by source (~50–62 gf, reflecting the two-stage spring). It's MX keycap compatible, typically a 3-pin design.
2. User Sentiment
Liked as an affordable linear with a two-stage feel — the progressive spring makes bottom-out more controlled than a straight linear, which some typists prefer. Good value in Akko's lineup. Budget-tier caveats apply (stock lube/consistency good-for-the-price), and the force is best described as a range because of the two-stage spring.
3. Real-World Applications
Custom and enthusiast mechanical keyboards wanting a budget linear with a progressive (two-stage) spring — gaming/typing in standard MX plate-mount (3-pin) or hot-swap builds.
4. Technical Specifications
- Type: Linear, MX-style mechanical; two-stage (progressive) spring
- Force: ~50–62 gf (varies with the two-stage spring / source)
- Travel: 2 mm actuation, 4 mm total
- Life: ~80 million actuations (per Akko listing)
- Stem/color: orange stem
- Mount: 3-pin, MX keycap compatible
5. Ordering & Compatibility
Sold in packs (e.g. 45 pcs) by Akko and retailers. 3-pin — seats in plate-mount boards, works in 5-pin hot-swap sockets. Takes MX keycaps. Part of Akko's CS lineup (other linears: Cream Yellow, Jelly Black, Matcha Green, Wine Red; tactiles: Lavender Purple, Ocean Blue).
6. Known Issues
No major reliability issues. Practical notes: force is a range (two-stage spring — confirm the listing), budget-tier lube/consistency, 3-pin (plan plate vs PCB mount), and it's an MX contact linear (not magnetic/Hall-effect).
出典
- Akko CS Starfish Switch — linear, two-stage spring — akkogear.com
- Akko CS Starfish — linear, two-stage spring — switchmodders.com
仕様一覧
|
Actuation Force
The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).
|
~50-62g (two-stage spring; varies by source)
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Orange stem
|
|
Keycap compat
|
MX-compatible
|
|
Mechanical Life
How many press cycles before mechanical failure. Higher is better — 10M cycles at 100 presses/day = 274 years.
|
80,000,000 cycles
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
3-pin
|
|
Switch type
|
Linear (MX-style contact, two-stage/progressive spring)
|
|
Travel Distance
How far the button moves when pressed. Shorter = faster response. Sanwa 0.85mm is extremely short for competitive gaming.
|
2mm actuation, 4mm total
|
取付クイックリファレンス
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
外形寸法
トラブルシューティング
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
購入先
価格帯
$50.46 — $133.03
across 2 sellers in US dollars
主要仕様
- Actuation Force
- ~50-62g (two-stage spring; varies by source)
- Color
- Orange stem
- Keycap compat
- MX-compatible
- Mechanical Life
- 80,000,000 cycles
- Mounting Type
- 3-pin
ユーザーの声
“The heaviest Akko linear at 62g. For typists who prefer firm resistance. Reduces accidental keypresses. Good for people who bottom out hard.”
詳しく見る
Akko のその他の製品
Akko
BOTANY 38G LINEAR PCB MOUNT SWITCHES 45 PACK
Akko Botany 38g Linear PCB Mount Switches 45 pack
Akko
CREAMY BLACK PRO 55G LINEAR PCB MOUNT SWITCHES 45 PACK
Akko Creamy Black Pro 55g Linear PCB Mount Switches 45 Pack
Akko
CREAMY BLUE PRO V3 45G TACTILE PCB MOUNT SWITCHES 45 PACK
Akko Creamy Blue Pro V3 45g Tactile PCB Mount Switches 45 Pack