MP3-10R
現行品22mm Red Extended Pushbutton Head (ABB Modular)
ABB modular red extended push button.
主な用途
Extended red stop button for ABB panels. Raised profile for accessibility.
仕様一覧
|
Actuator Type
The button head style. Flush sits level with the bezel (prevents accidental presses). Extended protrudes for easy access.
|
Extended
|
|
Bezel
The ring around the button face. Chrome/silver for standard use, black for stealth panels.
|
Black plastic
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Red
|
|
Component type
|
Head/operator only (contact block + MCBH holder separate)
|
|
Contact Configuration
1NO + 1NC: One circuit closes and one opens when pressed. Common for start buttons that also signal 'running' state.
|
None integral — add MCB-10 (1NO)/MCB-01 (1NC) via MCBH holder
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
IP Rating
IP66: Dust-tight and withstands powerful water jets from any direction. Standard for outdoor and washdown applications.
|
IP66 (front) / IP20 (terminals); NEMA 1/3R/4/4X/12/13
|
|
Operating temp
|
-25 to +70 C
|
取付クイックリファレンス
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
外形寸法
配線図
トラブルシューティング
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
購入先
価格帯
$6.31 — $95.07
3 社の販売代理店
主要仕様
- Actuator Type
- Extended
- Bezel
- Black plastic
- Certifications
- UL, CSA, CE
- Color
- Red
- Component type
- Head/operator only (contact block + MCBH holder separate)
ユーザーの声
“Extended red stop button for ABB panels. Raised profile for accessibility.”