3SU1132-0AB60-1BA0
AttivoSIRIUS ACT White Illuminated Flush 24V
Siemens SIRIUS ACT illuminated white flush.
Applicazioni Comuni
White illuminated for neutral status. Completes the full Siemens illuminated range: green, red, yellow, blue, white.
Research Notes
1. Overview
The catalog stored this SKU as 3SU1132-0AB10-1BA1 (color: White). The trailing "-1BA1" is invalid, matching the family-wide corruption in #335/#336/#337. But unlike its siblings, fixing only the trailing digit to 3SU1132-0AB10-1BA0 does NOT yield a valid, orderable part: exhaustive searches across Farnell, RS Components, Mouser, DigiKey, Siemens Industry Mall/SiePortal, and Electric Automation Network return zero hits for any illuminated 3SU1102/3SU1132/3SU1152 SKU coded "0AB10." Every "0AB10" hit found instead is a NON-illuminated unit (3SU1100/3SU1130/3SU1150-0AB10-1BA0, 3SU1000-0AB10-0AA0), all explicitly labeled BLACK. Siemens appears not to sell an illuminated pushbutton coded "0AB10" at all — consistent with black being opaque and unsuited to backlighting. The genuine white illuminated SKU in this family is 3SU1132-0AB60-1BA0, confirmed white by Amazon and Electric Automation Network — matching the stored color field. Recommended fix: 3SU1132-0AB60-1BA0, not the naive 3SU1132-0AB10-1BA0.
2. User Sentiment
No forum/community discussion — commodity industrial part. Amazon, Electric Automation Network, Southern Controls, and SiePortal listings are neutral spec-sheet entries.
3. Real-World Applications
22mm panel pushbutton for HMI stations. Per IEC 60204-1, WHITE (grey/blue permitted as substitutes) denotes a general/neutral function with no specific safety meaning — cycle-start or general-purpose commands. The illuminated white cap suits general status/confirmation indication.
4. Technical Specifications
- Corrected MLFB: 3SU1132-0AB60-1BA0 — NOT 3SU1132-0AB10-1BA0 (illuminated + black combo not found to exist)
- Color: White — confirmed for 0AB60 (Amazon, Electric Automation Network); "0AB10" = Black, confirmed only for non-illuminated variants
- Contact: 1 NO (function "B"); Voltage: 24V AC/DC (3SU1132 class)
- Illumination: Yes, integral LED; Actuator: Flush, momentary
- Front ring: Metal; Terminal: Screw; Protection: IP66/IP67/IP69K (per Amazon listing for the 3SU1102-0AB60-1BA0 plastic variant)
- Stored color "White" is correct as a value, but stored PN's color-code digit ("0AB10") contradicts it.
5. Ordering & Compatibility
3SU1132-0AB60-1BA0 confirmed genuine via Electric Automation Network, and by analogy to actively-sold siblings 3SU1102-0AB60-1BA0 (Amazon, Southern Controls, SiePortal/teddatasheet) and 3SU1152-0AB60-1BA0 (Siemens industry-mobile-support, Spanish teddatasheet). Compatible with 3SU1400-series contact modules and 3SU1002 bare holders.
6. Known Issues
Primary: invalid trailing digit (family-wide "-1BA1" corruption). Secondary, more significant: the naive single-digit fix (3SU1132-0AB10-1BA0) is not a real orderable illuminated part — "0AB10"/black is documented only for non-illuminated units across the whole 3SU1 line. Recommend 3SU1132-0AB60-1BA0 (matches stored color) over the trailing-digit-only fix.
11 sources
- Siemens 3SU11020AB601BA0 Illuminated Pushbutton, Plastic, IP66, IP67, IP69K, 22mm, White — Amazon
- 3SU1132-0AB60-1BA0 SIEMENS Illuminated pushbutton, 22mm, round, plastic with metal front ring, white — Electric Automation Network
- Data sheet 3SU1102-0AB60-1BA0 — Siemens Industry Support (teddatasheet index)
- 3SU1102-0AB60-1BA0 - SiePortal — Siemens SiePortal
- 3SU1102-0AB60-1BA0-Z Y12 - SiePortal — Siemens SiePortal
- 3SU1102-0AB60-1BA0 - Push-buttons and pilot lights (Siemens) — Southern Controls
- 3SU1152-0AB60-1BA0 - Siemens Product Information — Siemens Product Information
- Siemens 3SU11000AB101BA0 Pushbutton Unit, 22mm, Plastic, Momentary, 1NO, Flush, Screw Terminal, Black (non-illuminated; confirms 0AB10=Black) — Amazon
- 3SU1150-0AB10-1BA0-Z Y10 Siemens PUSHBUTTON, BLACK (non-illuminated) — ZWOD Ltd
- 3SU1100-0AB10-1BA0 | Siemens SIRIUS ACT Drucktasten-Kompletteinheit, Schwarz (non-illuminated, black) — RS Components (Germany)
- 3SU1130-0AB10-1BA0 | Siemens SIRIUS ACT Drucktasten-Kompletteinheit, Schwarz (non-illuminated, black) — RS Components (Germany)
Specifiche
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
White
|
|
Contact Configuration
Normally Open — circuit is off until you press. Standard for start/go/enable functions.
|
1NO
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
Illumination
Whether the button has a built-in light. Illuminated buttons show status (lit = active).
|
Illuminated
|
|
IP Rating
IP67: Dust-tight and survives temporary water submersion (1m for 30 min). Handles oil splashes, steam cleaning, and rain.
|
IP67
|
|
LED Voltage
The voltage required for the built-in LED. Must match your control circuit voltage (typically 24V DC or 230V AC).
|
24V AC/DC
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Metal front ring
|
Guida Rapida all'Installazione
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensioni
Schema di Cablaggio
Risoluzione dei Problemi
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Dove Acquistare
Fascia di prezzo
$19.59 — $83.08
presso 2 distributori
Specifiche Rapide
- Certifications
- UL, CSA, CE
- Color
- White
- Contact Configuration
- 1NO
- Cutout Diameter
- 22mm
- Illumination
- Illuminated
Cosa Dicono gli Utenti
“White illuminated for neutral status. Completes the full Siemens illuminated range: green, red, yellow, blue, white.”
Approfondisci
Classificazioni IP Spiegate
Cosa significano IP65, IP66, IP67, IP69K per la Sua applicazione
Guida 22mm vs 30mm
Quale dimensione del foro pannello Le serve?
Blocchi Contatti: NO vs NC
Come scegliere e cablare i blocchi contatti
Strumento Trova Pulsante
Trovi il pulsante giusto per tipo, dimensione e colore
