Seimitsu Arcade Service Push Button, model DS-412. This pushbutton has a diameter of 18mm and comes in two colours: red and white.
Specifiche
|
Arcade express id
|
941
|
|
Weight kg
|
0.050000
|
Guida Rapida all'Installazione
Mounting: Snap-in buttons push into a 30mm hole from the top of the panel. Screw-in buttons thread from below and secure with a nut. Use 2-3mm acrylic, wood, or metal panel.
Wiring: Connect the microswitch terminals to your encoder or PCB. Common ground shared across all buttons. Quick-disconnect (0.110") terminals are standard on Japanese buttons.
Dimensioni
Risoluzione dei Problemi
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Specifiche Rapide
- Arcade express id
- 941
- Weight kg
- 0.050000
