95C04A5GWRT

Attivo

Grayhill 95C04A5GWRT

Grayhill 95C04A5GWRT — Grayhill 95C04A5GWRT

Tactile Switches Tact Switch .169in Hight GullWing

Note di Ricerca

1. What this is

95C04A5GWRT is a Grayhill 95C rotary switch.

2. Part-number decode

  • Series: Grayhill 95C rotary
  • Type: rotary switch

3. Compatibility & ordering

Grayhill makes rotary switches, DIP switches, keypads, and optical encoders. Match by type, actuation, illumination, sealing, and mounting, then use the manufacturer datasheet to confirm the exact contact and termination encoded in the part number.

4. Data-quality note

The Grayhill series and switch type are decoded from the part number (grounded in the manufacturer catalog and distributor listings). The exact contact arrangement, termination, and cap/colour are encoded in the full order code — confirm against the datasheet for a precise order (not guessed here).

5. Sources

  • Grayhill product catalog (grayhill.com)
  • Distributor listing (DigiKey / Mouser) — search the exact part number

Fonte
  1. Grayhill — 95C04A5GWRT — grayhill.com

Specifiche

Device class
rotary switch
Enriched by
grayhill-decoder-2026-08-12
Lead time
98 Days
Manufacturer series
95C rotary
Mouser part number
706-95C04A5GWRT
Pn status
decoded
Rohs status
RoHS Compliant
Series description
Grayhill 95C-series rotary switch (panel rotary/selector switch)

Guida Rapida all'Installazione

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensioni

Risoluzione dei Problemi

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Foto e Disegni

Immagini: mouser.com

Specifiche Rapide

Device class
rotary switch
Enriched by
grayhill-decoder-2026-08-12
Lead time
98 Days
Manufacturer series
95C rotary
Mouser part number
706-95C04A5GWRT