INK-V2-SILENT-RED
AttivoGateron INK V2 Silent Red 60g
Gateron INK V2 Silent Red — premium dampened linear.
Applicazioni Comuni
Silent version of the premium INK V2. Smoky housing + dampeners for the quietest premium typing experience. For high-end office builds and streaming setups.
Specifiche
|
Actuation Force
The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).
|
~55-63g (Silent Ink linears run heavier; confirm listing)
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Red stem, smoky housing
|
|
Keycap compat
|
MX-compatible
|
|
Mechanical Life
How many press cycles before mechanical failure. Higher is better — 10M cycles at 100 presses/day = 274 years.
|
80,000,000 cycles
|
|
Switch type
|
Silent linear (premium Ink line, smoky housing, dampened)
|
|
Travel Distance
How far the button moves when pressed. Shorter = faster response. Sanwa 0.85mm is extremely short for competitive gaming.
|
2mm actuation, 3.8mm total
|
|
V2 note
|
V2 upgraded contact leaves (anti-fallout)
|
Guida Rapida all'Installazione
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensioni
Risoluzione dei Problemi
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Dove Acquistare
Fascia di prezzo
$12.23 — $38.15
presso 2 distributori
Specifiche Rapide
- Actuation Force
- ~55-63g (Silent Ink linears run heavier; confirm listing)
- Color
- Red stem, smoky housing
- Keycap compat
- MX-compatible
- Mechanical Life
- 80,000,000 cycles
- Switch type
- Silent linear (premium Ink line, smoky housing, dampened)
Cosa Dicono gli Utenti
“Silent version of the premium INK V2. Smoky housing + dampeners for the quietest premium typing experience. For high-end office builds and streaming setups.”
Approfondisci
Classificazioni IP Spiegate
Cosa significano IP65, IP66, IP67, IP69K per la Sua applicazione
Guida 22mm vs 30mm
Quale dimensione del foro pannello Le serve?
Blocchi Contatti: NO vs NC
Come scegliere e cablare i blocchi contatti
Strumento Trova Pulsante
Trovi il pulsante giusto per tipo, dimensione e colore
