BABY KANGAROO 2.0 TACTILE

Name: Gateron BABY KANGAROO 2.0 TACTILE
Brand: Gateron
SKU: BABY KANGAROO 2.0 TACTILE
Price: 64.99 USD
Availability: InStock

Attivo

Gateron Baby Kangaroo 2.0 Tactile Switch

Each Gateron Baby Kangaroo 2.0 Tactile Switch Set comes with 45 switches and 110 switches options to choose.

Note di Ricerca

1. What this is

Gateron Baby Kangaroo 2.0 Tactile Switch is a mechanical keyboard switch from Gateron. It is tactile.

2. Spec decode (from product name)

Switch type: tactile

3. Compatibility & use

Standard MX-style keyboard switch. Choose by feel (linear/tactile/clicky), actuation force, and sound (silent vs standard); 5-pin PCB-mount switches also fit plate-mount boards. Hot-swap or solder depending on your board.

4. Data-quality note

The switch type is decoded from the name; the exact actuation force and mount should be confirmed against the manufacturer's spec. Flagged decoded-partial. (Note: some of these rows are catalogued under a generic push-button/arcade-button category in the source data; the correct device class is keyboard switch, recorded in the specs above.)

5. Sources

Gateron product page / keyboard-switch community databases
Distributor / vendor listing — search the exact switch name

Fonte

Gateron Gateron Baby Kangaroo 2.0 Tactile Switch — keyboard-switch spec

Specifiche

Device class	mechanical keyboard switch
Enriched by	keyboard-decoder-2026-08-12
Pn status	decoded-partial
Product type	Switches
Series description	Gateron mechanical keyboard switch (tactile)
Shopify id	7116454723673
Switch type	tactile
Vendor	Switch-Gateron

Guida Rapida all'Installazione

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensioni

Risoluzione dei Problemi

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.