SDB-202A-24
AttivoCrown 202A 24mm Translucent Button
Crown 202A translucent 24mm for LED Start/Select.
Applicazioni Comuni
Translucent 24mm for LED-lit Start/Select buttons on Korean-style fight sticks.
Specifiche
|
Actuation Force
The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).
|
80g
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Clear (LED compatible)
|
|
Diameter
|
24mm
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Screw-in
|
Guida Rapida all'Installazione
Mounting: Snap-in buttons push into a 24mm hole from the top of the panel. Screw-in buttons thread from below and secure with a nut. Use 2-3mm acrylic, wood, or metal panel.
Wiring: Connect the microswitch terminals to your encoder or PCB. Common ground shared across all buttons. Quick-disconnect (0.110") terminals are standard on Japanese buttons.
Dimensioni
Risoluzione dei Problemi
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Dove Acquistare
Fascia di prezzo
$98.58 — $159.06
presso 2 distributori
Specifiche Rapide
- Actuation Force
- 80g
- Color
- Clear (LED compatible)
- Diameter
- 24mm
- Mounting Type
- Screw-in
Cosa Dicono gli Utenti
“Translucent 24mm for LED-lit Start/Select buttons on Korean-style fight sticks.”