MX2A-E1NN

Attivo

CHERRY MX2A-E1NN

Cherry MX2A-E1NN — CHERRY MX2A-E1NN

Tactile Switches Blue stem, Full Travel Mechanical KeyswitchClick Tactile Feel, 60cNNo LED, No DiodeFrame mount (no fixation pins)

Note di Ricerca

1. What this is

MX2A-E1NN ("CHERRY MX2A-E1NN") is catalogued as a push-button / switch device from Cherry.

2. What we know

  • Manufacturer: Cherry
  • Category: push-button / switch device
  • Part number / name: MX2A-E1NN — CHERRY MX2A-E1NN
  • Cherry — see the manufacturer's catalog for this part.

3. How to identify / order the exact part

The full specifications for this part are not machine-decodable from the data we hold. To confirm the exact configuration (contacts, rating, colour, mounting, protocol), search the Cherry catalog for this part number on the manufacturer site or a distributor (DigiKey / Mouser / RS).

4. Data-quality note

This page is generated from the catalogued manufacturer, category, and product name. Per our keep-and-document policy we publish a page for every part we hold and state plainly what is known versus what needs verification, rather than deleting the row or inventing specs. Flagged decoded-partial.

5. Sources

  • Cherry product catalog — search "MX2A-E1NN" / "CHERRY MX2A-E1NN"

Fonte
  1. Cherry MX2A-E1NN — distributor/catalog

Specifiche

Device class
push-button
Enriched by
generic-fallback-2026-08-12
Lead time
112 Days
Mouser part number
540-MX2A-E1NN
Pn status
decoded-partial
Rohs status

Guida Rapida all'Installazione

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensioni

Risoluzione dei Problemi

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Foto e Disegni

Immagini: mouser.com

Specifiche Rapide

Device class
push-button
Enriched by
generic-fallback-2026-08-12
Lead time
112 Days
Mouser part number
540-MX2A-E1NN
Pn status
decoded-partial