MP0038

Attivo

Bulgin MP0038

Bulgin MP0038 — Bulgin MP0038

Pushbutton Switches LOW BTN FRONT MOUNT

Note di Ricerca

1. What this is

MP0038 is a Bulgin MP anti-vandal pushbutton.

2. Part-number decode

  • Series: Bulgin MP
  • Type: pushbutton
  • Ingress rating: IP66/IP67

3. Compatibility & ordering

Bulgin makes rugged anti-vandal pushbuttons (the Vandal-Resistant/Buccaneer line), sealed connectors, and indicators for harsh environments. Match by type, actuation, illumination, sealing, and mounting, then use the manufacturer datasheet to confirm the exact contact and termination encoded in the part number.

4. Data-quality note

The Bulgin series and switch type are decoded from the part number (grounded in the manufacturer catalog and distributor listings). The exact contact arrangement, termination, and cap/colour are encoded in the full order code — confirm against the datasheet for a precise order (not guessed here).

5. Sources

  • Bulgin product catalog (bulgin.com)
  • Distributor listing (DigiKey / Mouser) — search the exact part number

Fonte
  1. Bulgin — MP0038 — bulgin.com

Specifiche

Device class
pushbutton
Enriched by
bulgin-decoder-2026-08-12
Ingress rating
IP66/IP67
Lead time
56 Days
Manufacturer series
MP
Mouser part number
117-MP0038
Pn status
decoded
Rohs status
RoHS Compliant
Series description
Bulgin MP-series anti-vandal pushbutton switch (metal, sealed vandal-resistant panel pushbutton; momentary or latching)

Guida Rapida all'Installazione

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensioni

Risoluzione dei Problemi

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Foto e Disegni

Immagini: mouser.com

Specifiche Rapide

Device class
pushbutton
Enriched by
bulgin-decoder-2026-08-12
Ingress rating
IP66/IP67
Lead time
56 Days
Manufacturer series
MP