STARLIT 45G LINEAR PLATE MOUNT SWITCHES 45 PACK

Name: Akko STARLIT 45G LINEAR PLATE MOUNT SWITCHES 45 PACK
Brand: Akko
SKU: STARLIT 45G LINEAR PLATE MOUNT SWITCHES 45 PACK
Price: 13.0 USD
Availability: InStock

Attivo

Akko Starlit 45g Linear Plate Mount Switches 45 Pack

45g actuation force 50g bottom out force 1.8mm pretravel 3.4mm total travel POM stem Glittered PC top housing PA66 bottom housing LED light condenser for increased RGB brightness

Note di Ricerca

1. What this is

Akko Starlit 45g Linear Plate Mount Switches 45 Pack is a mechanical keyboard switch from Akko. It is linear, 45g, 3-pin (plate mount).

2. Spec decode (from product name)

Switch type: linear
Actuation force: 45g
Mount: 3-pin (plate mount)

3. Compatibility & use

Standard MX-style keyboard switch. Choose by feel (linear/tactile/clicky), actuation force, and sound (silent vs standard); this is a 3-pin plate-mount switch (needs a plate). Hot-swap or solder depending on your board.

4. Data-quality note

The switch type, force, and/or mount are decoded from the product name (the standard way keyboard switches are specified). Confirm exact spring curve, travel, and housing/stem material against the manufacturer's spec if precision matters. (Note: some of these rows are catalogued under a generic push-button/arcade-button category in the source data; the correct device class is keyboard switch, recorded in the specs above.)

5. Sources

Akko product page / keyboard-switch community databases
Distributor / vendor listing — search the exact switch name

Fonte

Akko Akko Starlit 45g Linear Plate Mount Switches 45 Pack — keyboard-switch spec

Specifiche

Actuation Force The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).	45g
Device class	mechanical keyboard switch
Enriched by	keyboard-decoder-2026-08-12
Mount	3-pin (plate mount)
Pn status	decoded
Product type	Keyboard Switches
Series description	Akko mechanical keyboard switch (linear)
Shopify id	9773745897772
Switch type	linear
Vendor	Akko

Guida Rapida all'Installazione

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensioni

Risoluzione dei Problemi

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.