IPE22EXWH

Aktif

TE Connectivity / Alcoswitch IPE22EXWH

TE Connectivity / Alcoswitch IPE22EXWH — TE Connectivity / Alcoswitch IPE22EXWH

Gambar seri: penjual menggunakannya untuk 2 bagian lain juga, jadi mungkin tidak menunjukkan versi yang persis ini.

Pushbutton Switches PUSH BUTTON EXTENDED WHITE

Catatan Penelitian

1. What this is

IPE22EXWH is a TE/Alcoswitch IPE illuminated pushbutton.

2. Part-number decode

  • Series: TE/Alcoswitch IPE
  • Type: illuminated pushbutton
  • Illuminated: yes

3. Compatibility & ordering

TE Connectivity / Alcoswitch makes pushbutton, toggle, slide, and tactile switches for electronics and industrial equipment. Match by type, actuation, illumination, sealing, and mounting, then use the manufacturer datasheet to confirm the exact contact and termination encoded in the part number.

4. Data-quality note

The TE/Alcoswitch series and switch type are decoded from the part number (grounded in the manufacturer catalog and distributor listings). The exact contact arrangement, termination, and cap/colour are encoded in the full order code — confirm against the datasheet for a precise order (not guessed here).

5. Sources

  • TE/Alcoswitch product catalog (te.com)
  • Distributor listing (DigiKey / Mouser) — search the exact part number

Sumber
  1. TE/Alcoswitch — IPE22EXWH — te.com

Spesifikasi

Device class
illuminated pushbutton
Enriched by
te-alcoswitch-decoder-2026-08-12
Illuminated
true
Lead time
61 Days
Manufacturer series
IPE
Mouser part number
655-IPE22EXWH
Pn status
decoded
Rohs status
Series description
TE/Alcoswitch IPE-series illuminated pushbutton switch

Referensi Cepat Instalasi

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensi

Pemecahan Masalah

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Foto & Gambar

Gambar: mouser.com

Spesifikasi Cepat

Device class
illuminated pushbutton
Enriched by
te-alcoswitch-decoder-2026-08-12
Illuminated
true
Lead time
61 Days
Manufacturer series
IPE