Schneider Electric · Harmony XB7 Seri

XB7NA42

Aktif
CE

22mm Red Push Button Economy XB7 1NC

Nomor bagian: A - 4
Schneider Electric Harmony XB7 Seri Introduced circa 2010

Schneider Harmony XB7 red economy push button.

Aplikasi Umum

Budget red stop button. Same 22mm mounting. For cost-sensitive OEM builds where the panel is enclosed and not visible.

Spesifikasi

Actuator Type
Flush
Certifications
CE
Color
Red
Contact Configuration
1NC
Cutout Diameter
22mm
IP Rating
IP65
Material
Plastic

Referensi Cepat Instalasi

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensi

Front 22mm cutout panel hole diameter Side panel contact ~45mm depth

Diagram Pengkabelan

L T 21 22 NC (closed) opens on press

Pemecahan Masalah

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Spesifikasi Cepat

Actuator Type
Flush
Certifications
CE
Color
Red
Contact Configuration
1NC
Cutout Diameter
22mm

Apa Kata Mereka

+

“Budget red stop button. Same 22mm mounting. For cost-sensitive OEM builds where the panel is enclosed and not visible.”

Reddit r/PLC 18 suka Lihat ulir →