ZB2BW337

Aktif

Schneider Electric ZB2BW337 Push Button

Nomor bagian: B - W - 3

Schneider Electric ZB2BW337 Push Button The Schneider Electric ZB2BW337 is a push button features with a momentary action. It has a flush actuator type.

Catatan Penelitian

1. What this is

ZB2BW337 is a Schneider Electric Harmony ZB2 (older generation) 22mm modular component (head/contact block).

2. Part-number decode

  • Series: Harmony ZB2
  • Panel cutout: 22mm
  • Bezel material: Metal
  • Type: head/block (modular)

3. Compatibility & ordering

Schneider's Harmony (22/16mm) and Square D Class 9001 (30mm) are the reference IEC/US command-switch ranges. This is a modular component — a Harmony/9001 device is assembled from an operator head + mounting collar + contact/light block(s). Confirm you have the matching head and blocks for a complete device. Match by size (16/22/30mm), bezel material (metal XB4/ZB4 vs plastic XB5/ZB5), function (pushbutton/selector/indicator/E-stop), colour, illumination, and contact arrangement; cross-reference to Allen-Bradley 800F/800T, Siemens 3SU, IDEC HW, or Eaton M22 by the same attributes if needed.

4. Data-quality note

The Schneider series/family is identified; bezel/size are indicative and the exact colour/contact configuration is left to the Schneider datasheet rather than guessed. Flagged decoded-partial.

5. Sources

  • Schneider Electric Harmony / Square D Class 9001 catalog (se.com)
  • Distributor listing (Rexel / Mouser / Newark) — search the exact part number

Sumber
  1. Schneider Electric — ZB2BW337 — se.com

Spesifikasi

Bezel material
metal
Component type
head/block (modular)
Enriched by
schneider-decoder-2026-08-12
Manufacturer series
Harmony ZB2
Panel cutout
22mm
Pn status
decoded-partial
Product type
Push Button
Wireless Range
Harmony / Square D Class 9001
Series description
Schneider Harmony ZB2 (older generation) 22mm modular component (head/contact block)
Shopify id
8346387906873
Vendor
Schneider Electric

Referensi Cepat Instalasi

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensi

Pemecahan Masalah

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Tempat Membeli

Kisaran harga

$13.94 — $13.94

from 1 seller in US dollars

Spesifikasi Cepat

Bezel material
metal
Component type
head/block (modular)
Enriched by
schneider-decoder-2026-08-12
Manufacturer series
Harmony ZB2
Panel cutout
22mm