RP3508ABLKREDREDNS

Aktif

E-Switch RP3508ABLKREDREDNS

E-Switch RP3508ABLKREDREDNS — E-Switch RP3508ABLKREDREDNS

Pushbutton Switches PUSHBUTTON, 3A 125VAC, SPST Off-(On), Panel Mount, Front Solder

Catatan Penelitian

1. What this is

RP3508ABLKREDREDNS is an E-Switch RP-series illuminated pushbutton.

2. Part-number decode

  • Series: E-Switch RP
  • Type: illuminated pushbutton
  • Illuminated: yes

3. Compatibility & ordering

E-Switch makes tactile, pushbutton (incl. anti-vandal/illuminated), toggle, slide, and appliance switches for electronics and industrial controls. Match by type, actuation (momentary/maintained), illumination, sealing, and mounting, then use the E-Switch datasheet to confirm the exact contact form and termination encoded in the part number.

4. Data-quality note

The E-Switch series and switch type are decoded from the part number (grounded in the e-switch.com catalog and DigiKey listings). The exact contact form, termination, actuation force, and illumination colour are encoded in the full order code — confirm against the E-Switch datasheet for a precise order (not guessed here).

5. Sources

  • E-Switch product catalog (e-switch.com)
  • Distributor listing (DigiKey / Mouser) — search the exact part number

Sumber
  1. E-Switch — RP3508ABLKREDREDNS — e-switch.com

Spesifikasi

Device class
illuminated pushbutton
Enriched by
eswitch-decoder-2026-08-12
Illuminated
true
Lead time
84 Days
Manufacturer series
RP
Mouser part number
612-RP3508ABLKREDRED
Pn status
decoded
Rohs status
Series description
E-Switch RP-series illuminated pushbutton switch (e.g. RP8200 maintained illuminated pushbutton)

Referensi Cepat Instalasi

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensi

Pemecahan Masalah

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Foto & Gambar

Gambar: mouser.com

Spesifikasi Cepat

Device class
illuminated pushbutton
Enriched by
eswitch-decoder-2026-08-12
Illuminated
true
Lead time
84 Days
Manufacturer series
RP