EDSSC1 LFS

Aktif

C&K EDSSC1 LFS

C&K EDSSC1 LFS — C&K EDSSC1 LFS

Gambar seri: penjual menggunakannya untuk 4 bagian lain juga, jadi mungkin tidak menunjukkan versi yang persis ini.

Tactile Switches ED & EDM Domes

Catatan Penelitian

1. What this is

EDSSC1 LFS is a C&K ELUM-family illuminated pushbutton / actuator (EL2/EDS/EDG/F2U line).

2. Part-number decode

  • Product line: C&K ELUM family
  • Type: illuminated pushbutton

3. Compatibility & ordering

C&K makes high-reliability electronic switches for PCB and panel mounting. Match by type (tactile / pushbutton / toggle / rotary), actuation (momentary vs latching), mounting (SMT / thru-hole / panel), and the electrical rating, then use the C&K datasheet to confirm the exact actuator height, force, and termination encoded in the part number.

4. Data-quality note

The C&K product line and switch type are identified; the detailed configuration (actuator, force, termination, contact form) is line-specific and left to the C&K datasheet rather than guessed. Flagged decoded-partial.

5. Sources

  • C&K Switches series datasheet (ckswitches.com)
  • Distributor listing (DigiKey / Mouser) — search the exact part number

Sumber
  1. C&K Switches — EDSSC1 LFS — ckswitches.com

Spesifikasi

Device class
illuminated pushbutton
Enriched by
ck-decoder-2026-08-12
Lead time
84 Days
Manufacturer series
ELUM family
Mouser part number
611-EDSSC1LFS
Pn status
decoded-partial
Rohs status
RoHS Compliant
Series description
C&K ELUM-family illuminated pushbutton / actuator (EL2/EDS/EDG/F2U line)

Referensi Cepat Instalasi

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensi

Pemecahan Masalah

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Foto & Gambar

Gambar: mouser.com

Spesifikasi Cepat

Device class
illuminated pushbutton
Enriched by
ck-decoder-2026-08-12
Lead time
84 Days
Manufacturer series
ELUM family
Mouser part number
611-EDSSC1LFS