Allen-Bradley 800T-FXT6D4 Push Button The Allen-Bradley 800T-FXT6D4 is a push button with a nema rating of 4, 13. It has a contact configuration of 1NCLB.
Catatan Penelitian
1. What this is
800T-FXT6D4 is a Allen-Bradley 800T 30.5mm command switch.
2. Part-number decode
- Series: Allen-Bradley 800T
- Type: command switch
- Panel cutout: 30.5mm
3. Compatibility & ordering
Allen-Bradley (Rockwell) makes the 800-series command switches: 800T/800H/800P (30.5mm heavy-duty) and 800F (22mm IEC), modular operators with separate contact blocks. Match by type, actuation, illumination, sealing, and mounting, then use the manufacturer datasheet to confirm the exact contact and termination encoded in the part number.
4. Data-quality note
The Allen-Bradley series and switch type are decoded from the part number (grounded in the manufacturer catalog and distributor listings). The exact contact arrangement, termination, and cap/colour are encoded in the full order code — confirm against the datasheet for a precise order (not guessed here).
5. Sources
- Allen-Bradley product catalog (rockwellautomation.com)
- Distributor listing (DigiKey / Mouser) — search the exact part number
Sumber
- Allen-Bradley — 800T-FXT6D4 — rockwellautomation.com
Spesifikasi
|
Device class
|
command switch
|
|
Enriched by
|
ab-decoder-2026-08-12
|
|
Manufacturer series
|
800T
|
|
Panel cutout
|
30.5mm
|
|
Pn status
|
decoded
|
|
Product type
|
Push Button
|
|
Series description
|
Allen-Bradley 800T 30.5mm heavy-duty command switch (pushbutton/selector/indicator/E-stop; NEMA 4/13). Modular operator + contact blocks
|
|
Shopify id
|
8345352241465
|
|
Vendor
|
Allen-Bradley
|
Referensi Cepat Instalasi
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensi
Pemecahan Masalah
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Tempat Membeli
Kisaran harga
$32.62 — $32.62
from 1 seller in US dollars
Spesifikasi Cepat
- Device class
- command switch
- Enriched by
- ab-decoder-2026-08-12
- Manufacturer series
- 800T
- Panel cutout
- 30.5mm
- Pn status
- decoded