Basic / Snap Action Switches Style F Scrw Std White Button
Research Notes
1. What this is
P1-62119 is an OTTO P1-series full-size sealed momentary pushbutton — rugged military-grade, moistureproof snap-action with positive tactile feel.
2. Part-number decode
- Series: OTTO P1
- Action: Momentary
- Military spec: MIL-PRF-8805/3
- Configuration code: the digits after the dash (e.g. the
62119group) encode the exact actuator, contact arrangement, termination, and cap/color per OTTO's datasheet — not derivable from the part number alone
3. Compatibility & ordering
OTTO switches are rugged, sealed electromechanical pushbuttons for commercial, military, and aerospace use. Match by series (size/style — P1 full-size, P3 regular, P8 compact, P9 dome, P7 subminiature, P5 alternate-action), action (momentary vs latching), and illumination, then use OTTO's datasheet to confirm the exact contact/terminal/cap configuration encoded in the numeric part of the code.
4. Data-quality note
The OTTO series and action type are decoded from the part number (grounded in OTTO's product bulletins and distributor listings). The exact electrical configuration in the numeric code — contact arrangement (NO/NC), terminal type, and cap/color — is OTTO-catalog-specific and is not asserted here; confirm it against OTTO's datasheet or 'build-a-part' for a precise order. Flagged decoded-partial rather than guessed.
5. Sources
- OTTO Controls product bulletin for the P1 series (otto-controls.com)
- Distributor listing (Mouser / Peerless Electronics) — search the exact part number
1 source
- OTTO Controls — P1-62119 — otto-controls.com
स्पेसिफिकेशन
|
Action
|
Momentary
|
|
Config code
|
OTTO configuration code — exact actuator/contact/terminal/cap per OTTO datasheet (not decodable from PN alone)
|
|
Device class
|
sealed pushbutton
|
|
Enriched by
|
otto-decoder-2026-08-12
|
|
Lead time
|
42 Days
|
|
Manufacturer series
|
P1
|
|
Mil spec
|
MIL-PRF-8805/3
|
|
Mouser part number
|
999-P1-62119
|
|
Pn status
|
decoded-partial
|
|
Rohs status
|
RoHS Compliant
|
|
Series description
|
OTTO P1-series full-size sealed momentary pushbutton — rugged military-grade, moistureproof snap-action with positive tactile feel
|
इंस्टॉलेशन त्वरित संदर्भ
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
आयाम
समस्या निवारण
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
संक्षिप्त स्पेसिफिकेशन
- Action
- Momentary
- Config code
- OTTO configuration code — exact actuator/contact/terminal/cap per OTTO datasheet (not decodable from PN alone)
- Device class
- sealed pushbutton
- Enriched by
- otto-decoder-2026-08-12
- Lead time
- 42 Days