ZERO35 MAGNETIC

सक्रिय

MelGeek Zero35 Magnetic Switch

MelGeek ZERO35 MAGNETIC — MelGeek Zero35 Magnetic Switch

Compatible with the Centauri Series, MADE Pro/Pro+/Ultra/Ultra+ Series

अनुसंधान नोट्स

1. What this is

MelGeek Zero35 Magnetic Switch is a magnetic (Hall-effect) keyboard switch from MelGeek. It is magnetic/Hall-effect.

2. Spec decode (from product name)

  • Magnetic (Hall-effect): yes — analog/adjustable actuation (requires a compatible HE keyboard)

3. Compatibility & use

Standard MX-style keyboard switch — note: magnetic/Hall-effect switches only work in Hall-effect keyboards, not standard mechanical PCBs. Choose by feel (linear/tactile/clicky), actuation force, and sound (silent vs standard); 5-pin PCB-mount switches also fit plate-mount boards. Hot-swap or solder depending on your board.

4. Data-quality note

This is identified as a MelGeek keyboard switch, but the type/force were not stated in the name — confirm the full spec against the manufacturer. Flagged needs-verification. (Note: some of these rows are catalogued under a generic push-button/arcade-button category in the source data; the correct device class is keyboard switch, recorded in the specs above.)

5. Sources

  • MelGeek product page / keyboard-switch community databases
  • Distributor / vendor listing — search the exact switch name

स्रोत
  1. MelGeek MelGeek Zero35 Magnetic Switch — keyboard-switch spec

स्पेसिफिकेशन

Device class
magnetic (Hall-effect) keyboard switch
Enriched by
keyboard-decoder-2026-08-12
Magnetic
true
Pn status
needs-verification
Product type
switches
Series description
MelGeek mechanical keyboard switch
Shopify id
9120169427198
Vendor
MelGeek

इंस्टॉलेशन त्वरित संदर्भ

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

आयाम

समस्या निवारण

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

फोटो और ड्रॉइंग्स

छवियाँ: cdn.shopify.com

कहाँ से खरीदें

मूल्य सीमा

$10.0 — $10.0

from 1 seller in US dollars

संक्षिप्त स्पेसिफिकेशन

Device class
magnetic (Hall-effect) keyboard switch
Enriched by
keyboard-decoder-2026-08-12
Magnetic
true
Pn status
needs-verification
Product type
switches