KTT Bear Switches are a long-pole linear inspired by fluffy teddy bears. They feature a polycarbonate top housing, nylon bottom housing, and modified POM stem to provide the classic KTT sound signature. Switches are sold in packs of 10. Quantity 1 = 10 switches. Specifications: Linear Top Housing: Polycarbonate Bottom Housing: Nylon Stem: Modified POM 50g bottom-out force 3.8mm travel 5 Pin Unlubed
अनुसंधान नोट्स
1. What this is
BEAR ("KTT Bear") is catalogued as a push-button / switch device from KTT.
2. What we know
- Manufacturer: KTT
- Category: push-button / switch device
- Part number / name: BEAR — KTT Bear
- KTT — see the manufacturer's catalog for this part.
3. How to identify / order the exact part
The full specifications for this part are not machine-decodable from the data we hold. To confirm the exact configuration (contacts, rating, colour, mounting, protocol), search the KTT catalog for this part number on the manufacturer site or a distributor (DigiKey / Mouser / RS).
4. Data-quality note
This page is generated from the catalogued manufacturer, category, and product name. Per our keep-and-document policy we publish a page for every part we hold and state plainly what is known versus what needs verification, rather than deleting the row or inventing specs. Flagged needs-verification.
5. Sources
- KTT product catalog — search "BEAR" / "KTT Bear"
स्रोत
- KTT BEAR — distributor/catalog
स्पेसिफिकेशन
|
Device class
|
push-button
|
|
Enriched by
|
generic-fallback-2026-08-12
|
|
Mouser checked
|
2026-09-28
|
|
Mouser matched
|
false
|
|
Pn status
|
needs-verification
|
|
Product type
|
switches
|
|
Shopify id
|
8159934677213
|
|
Vendor
|
dangkeebs
|
इंस्टॉलेशन त्वरित संदर्भ
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
आयाम
समस्या निवारण
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
संक्षिप्त स्पेसिफिकेशन
- Device class
- push-button
- Enriched by
- generic-fallback-2026-08-12
- Mouser checked
- 2026-09-28
- Mouser matched
- false
- Pn status
- needs-verification