BABY BLUE 38G TACTILE PCB MOUNT

Name: KTT BABY BLUE 38G TACTILE PCB MOUNT
Brand: KTT
SKU: BABY BLUE 38G TACTILE PCB MOUNT
Price: 0.3 USD
Availability: InStock

सक्रिय

KTT Baby Blue 38g Tactile PCB Mount Switch

38g actuation force 2.0mm pretravel 3.5mm total travel POM stem PC top housing PA nylon bottom housing 18mm spring

अनुसंधान नोट्स

1. What this is

KTT Baby Blue 38g Tactile PCB Mount Switch is a mechanical keyboard switch from KTT. It is tactile, 38g, 5-pin (PCB mount).

2. Spec decode (from product name)

Switch type: tactile
Actuation force: 38g
Mount: 5-pin (PCB mount)

3. Compatibility & use

Standard MX-style keyboard switch. Choose by feel (linear/tactile/clicky), actuation force, and sound (silent vs standard); 5-pin PCB-mount switches also fit plate-mount boards. Hot-swap or solder depending on your board.

4. Data-quality note

The switch type, force, and/or mount are decoded from the product name (the standard way keyboard switches are specified). Confirm exact spring curve, travel, and housing/stem material against the manufacturer's spec if precision matters. (Note: some of these rows are catalogued under a generic push-button/arcade-button category in the source data; the correct device class is keyboard switch, recorded in the specs above.)

5. Sources

KTT product page / keyboard-switch community databases
Distributor / vendor listing — search the exact switch name

स्रोत

KTT KTT Baby Blue 38g Tactile PCB Mount Switch — keyboard-switch spec

स्पेसिफिकेशन

Actuation Force The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).	38g
Device class	mechanical keyboard switch
Enriched by	keyboard-decoder-2026-08-12
Mount	5-pin (PCB mount)
Pn status	decoded
Product type	Keyboard Switches
Series description	KTT mechanical keyboard switch (tactile)
Shopify id	10234675101996
Switch type	tactile
Vendor	KTT

इंस्टॉलेशन त्वरित संदर्भ

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

आयाम

समस्या निवारण

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.