Gateron Yellow linear switch.
सामान्य अनुप्रयोग
Community favorite budget linear.
संगतता
MX-compatible stem. Fits all MX-mount keyboards and keycaps. Pin-compatible with Cherry MX PCB footprint (3-pin or 5-pin depending on variant).
स्पेसिफिकेशन
|
Actuation Force
The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).
|
50g
|
इंस्टॉलेशन त्वरित संदर्भ
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
आयाम
समस्या निवारण
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
कहाँ से खरीदें
अभी तक कोई वितरक सूची उपलब्ध नहीं है।
संक्षिप्त स्पेसिफिकेशन
- Actuation Force
- 50g
उपयोगकर्ता क्या कह रहे हैं
“Gateron KS-3-YELLOW — Community favorite budget linear.”
