MX1A-E1NA
सक्रियCherry MX Blue Clicky Keyswitch
Cherry MX Blue — tactile clicky keyswitch.
सामान्य अनुप्रयोग
The classic clicky switch. Audible click and tactile bump at actuation point. Popular for typing-focused keyboards and transcription stations. The click mechanism inspired countless clones after the patent expired.
नकली उत्पाद चेतावनी High जोखिम
Same counterfeit risk as all Cherry MX. Blue is especially counterfeited due to its popularity. The click mechanism on genuine Cherry is precise and consistent — fakes often have mushy or inconsistent clicks.
स्पेसिफिकेशन
|
Actuation Force
The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).
|
50cN (50g)
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CE
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Blue stem
|
|
Mechanical Life
How many press cycles before mechanical failure. Higher is better — 10M cycles at 100 presses/day = 274 years.
|
100,000,000 cycles
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
PCB mount / plate mount
|
|
Travel Distance
How far the button moves when pressed. Shorter = faster response. Sanwa 0.85mm is extremely short for competitive gaming.
|
2.2mm actuation, 4mm total
|
इंस्टॉलेशन त्वरित संदर्भ
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
आयाम
समस्या निवारण
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
कहाँ से खरीदें
मूल्य सीमा
$28.03 — $46.12
2 वितरकों से
संक्षिप्त स्पेसिफिकेशन
- Actuation Force
- 50cN (50g)
- Certifications
- UL, CE
- Color
- Blue stem
- Mechanical Life
- 100,000,000 cycles
- Mounting Type
- PCB mount / plate mount
उपयोगकर्ता क्या कह रहे हैं
“Cherry MX switch is well-regarded in the mechanical keyboard community. Rated for 100,000,000 cycles cycles. The MX-compatible stem works with all standard keycaps.”
और जानें
Cherry से और अधिक
Cherry
80RETROS X HMX 1989 CLASSIC 45G LINEAR PCB MOUNT SWITCHES 35
80Retros x HMX 1989 Classic 45g Linear PCB Mount Switches 35 Pack
Cherry
80RETROS X HMX FJ400 50G LINEAR PCB MOUNT SWITCHES 35 PACK
80Retros x HMX FJ400 50g Linear PCB Mount Switches 35 Pack
Cherry
80RETROS X HMX JOKER 45G LINEAR PCB MOUNT SWITCHES 35 PACK
80Retros x HMX Joker 45g Linear PCB Mount Switches 35 Pack