Allen-Bradley 800S-2SCM Push Button Station The Allen-Bradley 800S-2SCM is a push button station with a contact configuration of 1NO, 1NC. It has a nema rating of 1. The 800S-2SCM as a surface mounting type.
अनुसंधान नोट्स
1. What this is
800S-2SCM is a Allen-Bradley 800S safety/selector.
2. Part-number decode
- Series: Allen-Bradley 800S
- Type: safety/selector
3. Compatibility & ordering
Allen-Bradley (Rockwell) makes the 800-series command switches: 800T/800H/800P (30.5mm heavy-duty) and 800F (22mm IEC), modular operators with separate contact blocks. Match by type, actuation, illumination, sealing, and mounting, then use the manufacturer datasheet to confirm the exact contact and termination encoded in the part number.
4. Data-quality note
The Allen-Bradley product line/type is identified; the detailed configuration is left to the datasheet rather than guessed. Flagged decoded-partial.
5. Sources
- Allen-Bradley product catalog (rockwellautomation.com)
- Distributor listing (DigiKey / Mouser) — search the exact part number
स्रोत
- Allen-Bradley — 800S-2SCM — rockwellautomation.com
स्पेसिफिकेशन
|
Device class
|
safety/selector
|
|
Enriched by
|
ab-decoder-2026-08-12
|
|
Manufacturer series
|
800S
|
|
Pn status
|
decoded-partial
|
|
Product type
|
Push Button Station
|
|
Series description
|
Allen-Bradley 800S safety / selector command device
|
|
Shopify id
|
8345350177081
|
|
Vendor
|
Allen-Bradley
|
इंस्टॉलेशन त्वरित संदर्भ
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
आयाम
समस्या निवारण
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
कहाँ से खरीदें
मूल्य सीमा
$145.59 — $145.59
from 1 seller in US dollars
संक्षिप्त स्पेसिफिकेशन
- Device class
- safety/selector
- Enriched by
- ab-decoder-2026-08-12
- Manufacturer series
- 800S
- Pn status
- decoded-partial
- Product type
- Push Button Station