800P-F1RA

सक्रिय

Allen-Bradley 800P-F1RA Push Button

Allen-Bradley 800P-F1RA — Allen-Bradley 800P-F1RA Push Button

Allen-Bradley 800P-F1RA Push Button The Allen-Bradley 800P-F1RA is a push button with a current rating of 10 Amps and a voltage rating of 600V. It has a flush mounting type. The 800P-F1RA features with a contact configuration of 1NO, 1NC.

अनुसंधान नोट्स

1. What this is

800P-F1RA is a Allen-Bradley 800P 30.5mm watertight command switch.

2. Part-number decode

  • Series: Allen-Bradley 800P
  • Type: command switch
  • Panel cutout: 30.5mm
  • Ingress rating: watertight

3. Compatibility & ordering

Allen-Bradley (Rockwell) makes the 800-series command switches: 800T/800H/800P (30.5mm heavy-duty) and 800F (22mm IEC), modular operators with separate contact blocks. Match by type, actuation, illumination, sealing, and mounting, then use the manufacturer datasheet to confirm the exact contact and termination encoded in the part number.

4. Data-quality note

The Allen-Bradley series and switch type are decoded from the part number (grounded in the manufacturer catalog and distributor listings). The exact contact arrangement, termination, and cap/colour are encoded in the full order code — confirm against the datasheet for a precise order (not guessed here).

5. Sources

  • Allen-Bradley product catalog (rockwellautomation.com)
  • Distributor listing (DigiKey / Mouser) — search the exact part number

स्रोत
  1. Allen-Bradley — 800P-F1RA — rockwellautomation.com

स्पेसिफिकेशन

Device class
command switch
Enriched by
ab-decoder-2026-08-12
Ingress rating
watertight
Manufacturer series
800P
Panel cutout
30.5mm
Pn status
decoded
Product type
Push Button
Series description
Allen-Bradley 800P 30.5mm watertight/corrosion-resistant command switch
Shopify id
8345347588409
Vendor
Allen-Bradley

इंस्टॉलेशन त्वरित संदर्भ

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

आयाम

समस्या निवारण

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

फोटो और ड्रॉइंग्स

छवियाँ: cdn.shopify.com

कहाँ से खरीदें

मूल्य सीमा

$350.65 — $350.65

from 1 seller in US dollars

संक्षिप्त स्पेसिफिकेशन

Device class
command switch
Enriched by
ab-decoder-2026-08-12
Ingress rating
watertight
Manufacturer series
800P
Panel cutout
30.5mm