Keygeek Sanglei Switches are linear switched manufactured by Keygeek and designed by XCJZ & JKDK. This switch aims to emphasize a more concentrated sounding switch and it achieves this by slightly changing the structure of the stem for a rounded pole-bottom and rail-top. This mold change, along with its material composition, creates a switch that has a "full" and deep sound and a smooth, light travel. Keygeek Sanglei Switches Feature: 18 included in each pack Linear Designed by XCJZ & JKDK Manufactured by Keygeek Top Housing: UHMWPE Bottom Housing: PA12 Stem: POM, Extended Total Travel: 3.85mm Actuation: 40±5g Bottom-out: 45g 5-Pin, PCB Mount MX Structure Lubed Price: $0.35 per switch Includes: 18 Keygeek Sanglei Switches
Notes de Recherche
1. What this is
Keygeek Sanglei Linear Switches is a mechanical keyboard switch from Keygeek. It is linear.
2. Spec decode (from product name)
- Switch type: linear
3. Compatibility & use
Standard MX-style keyboard switch. Choose by feel (linear/tactile/clicky), actuation force, and sound (silent vs standard); 5-pin PCB-mount switches also fit plate-mount boards. Hot-swap or solder depending on your board.
4. Data-quality note
The switch type is decoded from the name; the exact actuation force and mount should be confirmed against the manufacturer's spec. Flagged decoded-partial. (Note: some of these rows are catalogued under a generic push-button/arcade-button category in the source data; the correct device class is keyboard switch, recorded in the specs above.)
5. Sources
- Keygeek product page / keyboard-switch community databases
- Distributor / vendor listing — search the exact switch name
Source
- Keygeek Keygeek Sanglei Linear Switches — keyboard-switch spec
Spécifications
|
Device class
|
mechanical keyboard switch
|
|
Enriched by
|
keyboard-decoder-2026-08-12
|
|
Pn status
|
decoded-partial
|
|
Product type
|
Switches
|
|
Series description
|
Keygeek mechanical keyboard switch (linear)
|
|
Shopify id
|
7483677900865
|
|
Switch type
|
linear
|
|
Vendor
|
Keygeek
|
Référence rapide d'installation
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensions
Dépannage
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Spécifications rapides
- Device class
- mechanical keyboard switch
- Enriched by
- keyboard-decoder-2026-08-12
- Pn status
- decoded-partial
- Product type
- Switches
- Series description
- Keygeek mechanical keyboard switch (linear)
En savoir plus
Indices de protection IP expliqués
Ce que signifient IP65, IP66, IP67, IP69K pour votre application
Guide 22mm vs 30mm
Quelle taille de découpe de panneau vous faut-il ?
Blocs de contact : NO vs NC
Comment choisir et câbler les blocs de contact
Outil de recherche de boutons
Trouvez le bon bouton par type, taille et couleur