MUSE LINEAR

Actif

Keygeek Muse Linear Switches

Keygeek MUSE LINEAR — Keygeek Muse Linear Switches

Keygeek Muse Switches are linear switches with a modified UPE stem (U4+) that is surprisingly balanced given its usual sound signature tendency to be deep. Sound Profile: Neutral, Full, Smooth Keygeek Muse Switches Feature: 18 included in each pack Linear Top Housing: POM Bottom Housing: N4 Stem: U4+ (UPE Flat Stem Tip) Pre-travel: 2.0±0.2mm Total Travel: 3.8±0.2mm 5-Pin, PCB Mount Lubed 45g Version: Spring: 21mm Actuation: 35g Bottom-out: 45g  53g Version: Spring: 17mm Actuation: 42g Bottom-out: 53g Price: $0.32 per switch Includes: 18 Keygeek Muse Switches

Notes de Recherche

1. What this is

Keygeek Muse Linear Switches is a mechanical keyboard switch from Keygeek. It is linear.

2. Spec decode (from product name)

  • Switch type: linear

3. Compatibility & use

Standard MX-style keyboard switch. Choose by feel (linear/tactile/clicky), actuation force, and sound (silent vs standard); 5-pin PCB-mount switches also fit plate-mount boards. Hot-swap or solder depending on your board.

4. Data-quality note

The switch type is decoded from the name; the exact actuation force and mount should be confirmed against the manufacturer's spec. Flagged decoded-partial. (Note: some of these rows are catalogued under a generic push-button/arcade-button category in the source data; the correct device class is keyboard switch, recorded in the specs above.)

5. Sources

  • Keygeek product page / keyboard-switch community databases
  • Distributor / vendor listing — search the exact switch name

Source
  1. Keygeek Keygeek Muse Linear Switches — keyboard-switch spec

Spécifications

Device class
mechanical keyboard switch
Enriched by
keyboard-decoder-2026-08-12
Pn status
decoded-partial
Product type
Switches
Series description
Keygeek mechanical keyboard switch (linear)
Shopify id
7787185602625
Switch type
linear
Vendor
Keygeek

Référence rapide d'installation

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensions

Dépannage

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Photos & Dessins

Images : cdn.shopify.com

Où acheter

Fourchette de prix

$6.95 — $6.95

from 1 seller in US dollars

Spécifications rapides

Device class
mechanical keyboard switch
Enriched by
keyboard-decoder-2026-08-12
Pn status
decoded-partial
Product type
Switches
Series description
Keygeek mechanical keyboard switch (linear)