Tactile Switches Switch SMD 6.5N. Red Led
Research Notes
1. What this is
5GSH9658222R is an APEM tactile switch.
2. Part-number decode
- Series: APEM tactile
- Type: tactile switch
3. Compatibility & ordering
APEM makes pushbuttons (incl. anti-vandal and illuminated), tactile switches, toggle switches, joysticks, and indicators for industrial and electronic equipment. Match by type, actuation, illumination, sealing (IP rating), and mounting, then use the APEM datasheet to confirm the exact contact and actuator configuration encoded in the part number.
4. Data-quality note
The APEM series and switch type are decoded from the part number (grounded in the apem.com catalog and distributor listings). The exact contact arrangement, illumination, and actuator/cap are encoded in the full order code — confirm against the APEM datasheet for a precise order (not guessed here).
5. Sources
- APEM product catalog (apem.com)
- Distributor listing (RS / Mouser / DigiKey) — search the exact part number
1 source
- APEM — 5GSH9658222R — apem.com
Spécifications
|
Device class
|
tactile switch
|
|
Enriched by
|
apem-decoder-2026-08-12
|
|
Lead time
|
77 Days
|
|
Manufacturer series
|
tactile
|
|
Mouser part number
|
642-5GSH9658222R
|
|
Pn status
|
decoded
|
|
Rohs status
|
RoHS Compliant
|
|
Series description
|
APEM tactile switch (ADTS / MJTP / #GTH/#FTH/#ETH series — PCB tact switch, through-hole or SMT, various heights and forces)
|
Référence rapide d'installation
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensions
Dépannage
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Spécifications rapides
- Device class
- tactile switch
- Enriched by
- apem-decoder-2026-08-12
- Lead time
- 77 Days
- Manufacturer series
- tactile
- Mouser part number
- 642-5GSH9658222R
En savoir plus
Indices de protection IP expliqués
Ce que signifient IP65, IP66, IP67, IP69K pour votre application
Guide 22mm vs 30mm
Quelle taille de découpe de panneau vous faut-il ?
Blocs de contact : NO vs NC
Comment choisir et câbler les blocs de contact
Outil de recherche de boutons
Trouvez le bon bouton par type, taille et couleur
