2AF4-STOP

Actif

Altech 2AF4-STOP

Pushbutton Switches Push Button Op, 22mm, Non Ill.

Spécifications

Device class
pushbutton
Enriched by
altech-decoder-2026-08-12
Lead time
0 Days
Manufacturer series
2AF
Mouser part number
845-2AF4STOP
Operator material
metal
Panel cutout
22mm
Pn status
decoded
Rohs status
Series description
Altech 2AF-series 22mm non-illuminated metal-operator flush pushbutton (metal bezel, momentary or maintained per config)

Référence rapide d'installation

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensions

Dépannage

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Où acheter

Fourchette de prix

$6.36 — $6.36

chez 1 distributeurs

Spécifications rapides

Device class
pushbutton
Enriched by
altech-decoder-2026-08-12
Lead time
0 Days
Manufacturer series
2AF
Mouser part number
845-2AF4STOP