X MONSGEEK GREEN FOG 60G LINEAR PCB MOUNT SWITCHES 45 PACK

Name: Akko X MONSGEEK GREEN FOG 60G LINEAR PCB MOUNT SWITCHES 45 PACK
Brand: Akko
SKU: X MONSGEEK GREEN FOG 60G LINEAR PCB MOUNT SWITCHES 45 PACK
Price: 12.0 USD
Availability: InStock

Actif

Akko x Monsgeek Green Fog 60g Linear PCB Mount Switches 45 Pack

60g actuation force 70g bottom out force 2.0mm pretravel 3.6mm total travel POK stem PC top housing PA66 bottom housing LED light condenser for increased RGB brightness

Notes de Recherche

1. What this is

Akko x Monsgeek Green Fog 60g Linear PCB Mount Switches 45 Pack is a mechanical keyboard switch from Akko. It is linear, 60g, 5-pin (PCB mount).

2. Spec decode (from product name)

Switch type: linear
Actuation force: 60g
Mount: 5-pin (PCB mount)

3. Compatibility & use

Standard MX-style keyboard switch. Choose by feel (linear/tactile/clicky), actuation force, and sound (silent vs standard); 5-pin PCB-mount switches also fit plate-mount boards. Hot-swap or solder depending on your board.

4. Data-quality note

The switch type, force, and/or mount are decoded from the product name (the standard way keyboard switches are specified). Confirm exact spring curve, travel, and housing/stem material against the manufacturer's spec if precision matters. (Note: some of these rows are catalogued under a generic push-button/arcade-button category in the source data; the correct device class is keyboard switch, recorded in the specs above.)

5. Sources

Akko product page / keyboard-switch community databases
Distributor / vendor listing — search the exact switch name

Source

Akko Akko x Monsgeek Green Fog 60g Linear PCB Mount Switches 45 Pack — keyboard-switch spec

Spécifications

Actuation Force The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).	60g
Device class	mechanical keyboard switch
Enriched by	keyboard-decoder-2026-08-12
Mount	5-pin (PCB mount)
Pn status	decoded
Product type	Keyboard Switches
Series description	Akko mechanical keyboard switch (linear)
Shopify id	9773748814124
Switch type	linear
Vendor	Akko

Référence rapide d'installation

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensions

Dépannage

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.