CK x Haimu Pastel Thistle Tactile Switch The Thistle Tactile is part of our new Pastel Series with Haimu! The CK x Haimu Pastel Thistle Tactile Switch is loud tactile switch with a bump that is felt almost immediately on the downstroke. This switch features a PA (Nylon) top, PA (Nylon) Bottom, and a 63.5g 22mm double-stage spring. Like the color and materials but want to customize the feel and sound? Check out our modding essentials for slow springs , switch films and more! Switch Type Tactile Manufacturer Haimu Top Housing Material PA (Nylon) Bottom Housing Material PA (Nylon) Stem Material POM Spring Weight 63.5g double stage 22mm spring Mounting Pins 5-pin Factory Lube Yes
Uurimismärkmed
1. What this is
CK X HAIMU PASTEL THISTLE TACTILE ("CK x Haimu Pastel Thistle Tactile Switch") is catalogued as a push-button / switch device.
2. What we know
- Manufacturer: not recorded (placeholder: "Stocked")
- Category: push-button / switch device
- Part number / name: CK X HAIMU PASTEL THISTLE TACTILE — CK x Haimu Pastel Thistle Tactile Switch
- (no real manufacturer recorded — 'Stocked' is a source-catalog placeholder; identify the part from its name/number)
3. How to identify / order the exact part
The full specifications for this part are not machine-decodable from the data we hold. To confirm the exact configuration (contacts, rating, colour, mounting, protocol), search the part number/name on the manufacturer site or a distributor (DigiKey / Mouser / RS).
4. Data-quality note
This page is generated from the catalogued manufacturer, category, and product name. Per our keep-and-document policy we publish a page for every part we hold and state plainly what is known versus what needs verification, rather than deleting the row or inventing specs. Flagged decoded-partial.
5. Sources
- Distributor / marketplace listing — search "CK X HAIMU PASTEL THISTLE TACTILE" / "CK x Haimu Pastel Thistle Tactile Switch"
Allikas
- Stocked CK X HAIMU PASTEL THISTLE TACTILE — distributor/catalog
Spetsifikatsioonid
|
Device class
|
push-button
|
|
Enriched by
|
generic-fallback-2026-08-12
|
|
Pn status
|
decoded-partial
|
|
Product type
|
Accessories
|
|
Shopify id
|
7120043540591
|
|
Vendor
|
Stocked
|
Paigalduse kiirjuhend
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Mõõtmed
Veaotsing
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Kiirspetsifikatsioonid
- Device class
- push-button
- Enriched by
- generic-fallback-2026-08-12
- Pn status
- decoded-partial
- Product type
- Accessories
- Shopify id
- 7120043540591
