STI-6517
AktiivneSTI-6517 Stopper Station Shield — Clear Protective Cover
STI Stopper Station Shield — clear polycarbonate pivot-on cover for STI Stopper Station buttons/pull stations. Passive, no sounder (sounder version = STI-6517A).
Tüüpilised rakendused
Same polycarbonate protection without the alarm horn. Used over e-stops and critical buttons where the visual deterrent is enough. Also used over buttons that are accessed frequently but need protection from accidental bumps.
Uurimismärkmed
1. Overview
The STI-6517 is Safety Technology International's "Stopper® Station Shield" (Standard Station Shield) — a clear, thick polycarbonate protective cover that pivots/snaps directly onto STI Stopper® Station push buttons and pull stations to guard them against vandalism, impact, and accidental activation. It is a passive shield with no sounder (the sounder-equipped version is the separate STI-6517A "with Sound"). Newer Stopper Stations include two notched slots that the shield's pivots clip into for tool-free installation.
2. User Sentiment
Stocked by security/fire-safety distributors (Anixter, ZenSupply, alldataresource, safety-products wholesalers). It is regarded as an inexpensive, near-indestructible add-on; installers like that it clips on without tools and keeps the underlying button fully visible and operable. Being purpose-made for STI Stopper Stations, the main caveat noted is that it is not a universal cover — it mounts to STI's own stations, not arbitrary buttons.
3. Real-World Applications
Protecting fire-alarm pull stations, emergency stop / call buttons, and request-to-exit buttons that use STI Stopper Station housings, in schools, hospitals, transit, and public buildings where tampering and accidental presses are common.
4. Technical Specifications
- Type: Passive protective shield (pivot/snap-on), no sounder
- Material: Thick molded polycarbonate
- Color: Clear (transparent)
- Operating temp: -40° to 250°F (-40° to 121°C) typical polycarbonate range
- Mounting: Snaps/pivots onto STI Stopper Station buttons (two-notch clip on newer stations)
- Guarantee: 3-year against breakage of polycarbonate in normal use
5. Ordering & Compatibility
Sold individually (Anixter 700651, alldataresource, ZenSupply). Designed specifically for STI Stopper® Station buttons/pull stations — confirm the station model before ordering. The sounder version is STI-6517A (Stopper Station Shield with Sound); the -6517 itself is silent. Related STI covers include the -6518 Bopper Stopper for general push buttons/outlets.
6. Known Issues
No significant reliability issues reported. Passive polycarbonate part with no circuitry; the only real constraint is compatibility — it fits STI Stopper Stations, not generic buttons.
Allikas
- STI-6517 Safety Technology Intl Stopper — anixter.com
- STI-6517 Stopper Station Cover — id-enhancements.com
- Safety Technology STI-6517 Stopper Station Shield (700651) — alldataresource.com
- STI Bopper Stopper Protective Covers — zensupply.com
- STI-6517 STI Stopper Station Shield — safetyproductswholesale.com
Spetsifikatsioonid
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL Listed
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Clear
|
|
Guarantee
|
3-year against polycarbonate breakage
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Thick molded polycarbonate
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Snaps onto STI Stopper Station buttons (two-notch clip)
|
|
Operating temp
|
-40F to 250F (-40C to 121C)
|
|
Type
|
Passive protective shield (pivot/snap-on), no sounder
|
Paigalduse kiirjuhend
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Mõõtmed
Veaotsing
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Kust osta
Hinnavahemik
$53.94 — $142.78
across 2 sellers in US dollars
Kiirspetsifikatsioonid
- Certifications
- UL Listed
- Color
- Clear
- Guarantee
- 3-year against polycarbonate breakage
- Material
- Thick molded polycarbonate
- Mounting Type
- Snaps onto STI Stopper Station buttons (two-notch clip)
Mida kasutajad ütlevad
“Same polycarbonate protection without the alarm horn. Used over e-stops and critical buttons where the visual deterrent is enough. Also used over buttons that are accessed frequently but need protecti”