52PM9W4K

Aktiivne

Siemens 52PM9W4K

Siemens 52PM9W4K — Siemens 52PM9W4K

Pushbutton Switches PUSHBUTTON,MOM,YLW,1 3/4" PLST,2POS,1NO

Uurimismärkmed

1. What this is

52PM9W4K is a Siemens Class 52 30.5mm heavy-duty pushbutton / indicator / control-station device (Furnas heritage; watertight/oiltight, Type 4/4X/12/13). US-style 30mm command device.

2. Part-number decode

  • Series: Class 52 (30.5mm heavy-duty)
  • Panel cutout: 30.5mm

3. Compatibility & ordering

Siemens 30.5mm command switches are modular IEC-style panel devices. Match by size, function (pushbutton/selector/indicator/E-stop), color, illumination, and contact blocks; cross-reference to Schneider Harmony, Allen-Bradley 800F, IDEC HW, or Eaton M22 by the same attributes if needed.

4. Data-quality note

The Siemens series is decoded from the part number (grounded in the Siemens LV1 catalog and distributor listings). The detailed configuration (exact function, color, contact arrangement, voltage) is encoded in the full order code and is left to the Siemens datasheet rather than guessed here. Flagged decoded-partial.

5. Sources

  • Siemens LV1 catalog / SIRIUS ACT (3SU) & Class 52 selection data (siemens.com)
  • Siemens Industry Mall — search the exact part/material number
  • Distributor listing (Mouser / Newark) — search the exact part number

Allikas
  1. Siemens Industry Mall — 52PM9W4K — siemens.com

Spetsifikatsioonid

Device class
command-switch
Enriched by
siemens-decoder-2026-08-12
Lead time
25 Days
Manufacturer series
Class 52 (30.5mm heavy-duty)
Mouser part number
982-52PM9W4K
Panel cutout
30.5mm
Pn status
decoded-partial
Rohs status
Series description
Siemens Class 52 30.5mm heavy-duty pushbutton / indicator / control-station device (Furnas heritage; watertight/oiltight, Type 4/4X/12/13). US-style 30mm command device

Paigalduse kiirjuhend

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Mõõtmed

Veaotsing

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Fotod ja joonised

Pildid: mouser.com

Kiirspetsifikatsioonid

Device class
command-switch
Enriched by
siemens-decoder-2026-08-12
Lead time
25 Days
Manufacturer series
Class 52 (30.5mm heavy-duty)
Mouser part number
982-52PM9W4K