Linear 40g actuation force 2.0mm pretravel 4.0mm total travel POM stem and housing Detachable light guide window Dual-stage spring Factory lubed Check out the rest of the GATERON Full POM Smoothie Switch family
Uurimismärkmed
1. What this is
Gateron POM Strawberry Smoothie Switch is a mechanical keyboard switch from Gateron.
2. Spec decode (from product name)
- Type/force not stated in the product name — see the manufacturer spec.
3. Compatibility & use
Standard MX-style keyboard switch. Choose by feel (linear/tactile/clicky), actuation force, and sound (silent vs standard); 5-pin PCB-mount switches also fit plate-mount boards. Hot-swap or solder depending on your board.
4. Data-quality note
This is identified as a Gateron keyboard switch, but the type/force were not stated in the name — confirm the full spec against the manufacturer. Flagged needs-verification. (Note: some of these rows are catalogued under a generic push-button/arcade-button category in the source data; the correct device class is keyboard switch, recorded in the specs above.)
5. Sources
- Gateron product page / keyboard-switch community databases
- Distributor / vendor listing — search the exact switch name
Allikas
- Gateron Gateron POM Strawberry Smoothie Switch — keyboard-switch spec
Spetsifikatsioonid
|
Device class
|
mechanical keyboard switch
|
|
Enriched by
|
keyboard-decoder-2026-08-12
|
|
Pn status
|
needs-verification
|
|
Product type
|
Keyboard Switches
|
|
Series description
|
Gateron mechanical keyboard switch
|
|
Shopify id
|
10105832997164
|
|
Vendor
|
Gateron
|
Paigalduse kiirjuhend
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Mõõtmed
Veaotsing
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Kust osta
Hinnavahemik
$0.3 — $0.3
from 1 seller in US dollars
Kiirspetsifikatsioonid
- Device class
- mechanical keyboard switch
- Enriched by
- keyboard-decoder-2026-08-12
- Pn status
- needs-verification
- Product type
- Keyboard Switches
- Series description
- Gateron mechanical keyboard switch
