Please drop your email in the 'Notify Me When Available' section if the product model is shown as "Available Soon".
Uurimismärkmed
1. What this is
Gateron Baby Kangaroo 2.0 Tactile Switch Set is a mechanical keyboard switch from Gateron. It is tactile.
2. Spec decode (from product name)
- Switch type: tactile
3. Compatibility & use
Standard MX-style keyboard switch. Choose by feel (linear/tactile/clicky), actuation force, and sound (silent vs standard); 5-pin PCB-mount switches also fit plate-mount boards. Hot-swap or solder depending on your board.
4. Data-quality note
The switch type is decoded from the name; the exact actuation force and mount should be confirmed against the manufacturer's spec. Flagged decoded-partial. (Note: some of these rows are catalogued under a generic push-button/arcade-button category in the source data; the correct device class is keyboard switch, recorded in the specs above.)
5. Sources
- Gateron product page / keyboard-switch community databases
- Distributor / vendor listing — search the exact switch name
Allikas
- Gateron Gateron Baby Kangaroo 2.0 Tactile Switch Set — keyboard-switch spec
Spetsifikatsioonid
|
Device class
|
mechanical keyboard switch
|
|
Enriched by
|
keyboard-decoder-2026-08-12
|
|
Pn status
|
decoded-partial
|
|
Product type
|
Switch Set
|
|
Series description
|
Gateron mechanical keyboard switch (tactile)
|
|
Shopify id
|
7116400197721
|
|
Switch type
|
tactile
|
|
Vendor
|
Gateron
|
Paigalduse kiirjuhend
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Mõõtmed
Veaotsing
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Kiirspetsifikatsioonid
- Device class
- mechanical keyboard switch
- Enriched by
- keyboard-decoder-2026-08-12
- Pn status
- decoded-partial
- Product type
- Switch Set
- Series description
- Gateron mechanical keyboard switch (tactile)
