E30KC550STD

Aktiivne

Eaton Electrical E30KC550STD

Eaton Electrical E30KC550STD — Eaton Electrical E30KC550STD

Seeria pilt: müüja kasutab seda 16 muus osas ka, seega ei pruugi see näidata täpselt seda versiooni.

Switch Fixings TYPE D BTN EXTD BLACK CLOSE

Uurimismärkmed

1. What this is

E30KC550STD is an Eaton E30 30.5mm HEAVY-DUTY modular command device (Cutler-Hammer heritage; E30K* = collar/operator/contact components for 30.5mm control).

2. Part-number decode

  • Series: E30
  • Panel cutout: 30.5mm
  • Type: operator/collar/block
  • Construction: modular (operator, contact block(s), and mounting are separate parts)

3. Compatibility & ordering

Eaton's M22 (RMQ-Titan, 22mm) and E30 / 10250T (30.5mm heavy-duty) are its principal command-switch ranges. As an M22/E30 modular device, the operator/actuator, the contact or LED block(s), and the mounting adapter are ordered separately — a common ordering error is assuming a stored contact is included. Confirm you have all the pieces for a complete device. Match by size (22 / 30.5mm), function (pushbutton/selector/indicator/E-stop), color, illumination, and contact arrangement; cross-reference to Schneider Harmony, Allen-Bradley 800F/800T, Siemens 3SU, or IDEC HW by the same attributes if needed.

4. Data-quality note

The Eaton series, size, and component type are decoded from the part number (grounded in Eaton's Vol.7 catalog and distributor listings). The exact color and contact arrangement depend on the remaining digits and the sub-family — confirm against the Eaton datasheet for a precise order (not guessed here).

5. Sources

  • Eaton control-components catalog (Vol.7) / RMQ-Titan M22 & 10250T (eaton.com)
  • Distributor listing (Newark / Mouser) — search the exact part number

Allikas
  1. Eaton — E30KC550STD — eaton.com

Spetsifikatsioonid

Component type
operator/collar/block
Enriched by
eaton-decoder-2026-08-12
Lead time
0 Days
Manufacturer series
E30
Modular
true
Mouser part number
504-E30KC550STD
Panel cutout
30.5mm
Pn status
decoded
Rohs status
Series description
Eaton E30 30.5mm HEAVY-DUTY modular command device (Cutler-Hammer heritage; E30K* = collar/operator/contact components for 30.5mm control)

Paigalduse kiirjuhend

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Mõõtmed

Veaotsing

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Fotod ja joonised

Pildid: mouser.com

Kiirspetsifikatsioonid

Component type
operator/collar/block
Enriched by
eaton-decoder-2026-08-12
Lead time
0 Days
Manufacturer series
E30
Modular
true