LC2255EENPTAGGRY

Aktiivne

E-Switch LC2255EENPTAGGRY

E-Switch LC2255EENPTAGGRY — E-Switch LC2255EENPTAGGRY

Seeria pilt: müüja kasutab seda 4 muus osas ka, seega ei pruugi see näidata täpselt seda versiooni.

Pushbutton Switches 300mA/30VDC PC-Pin Latching NonShorting

Uurimismärkmed

1. What this is

LC2255EENPTAGGRY is an E-Switch E-Switch component — line not recognized.

2. Part-number decode

  • Series: E-Switch E-Switch (line not recognized)
  • Type: switch

3. Compatibility & ordering

E-Switch makes tactile, pushbutton (incl. anti-vandal/illuminated), toggle, slide, and appliance switches for electronics and industrial controls. Match by type, actuation (momentary/maintained), illumination, sealing, and mounting, then use the E-Switch datasheet to confirm the exact contact form and termination encoded in the part number.

4. Data-quality note

The exact E-Switch product line/configuration could not be confidently decoded from this part number. Kept and documented; flagged needs-verification.

5. Sources

  • E-Switch product catalog (e-switch.com)
  • Distributor listing (DigiKey / Mouser) — search the exact part number

Allikas
  1. E-Switch — LC2255EENPTAGGRY — e-switch.com

Spetsifikatsioonid

Enriched by
eswitch-decoder-2026-08-12
Lead time
0 Days
Manufacturer series
E-Switch (line not recognized)
Mouser part number
612-LC2255EENPTAGGRY
Pn status
needs-verification
Rohs status
RoHS Compliant
Series description
E-Switch component — exact product line/config could not be decoded from this part number; kept and flagged for verification rather than guessed

Paigalduse kiirjuhend

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Mõõtmed

Veaotsing

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Fotod ja joonised

Pildid: mouser.com

Kiirspetsifikatsioonid

Enriched by
eswitch-decoder-2026-08-12
Lead time
0 Days
Manufacturer series
E-Switch (line not recognized)
Mouser part number
612-LC2255EENPTAGGRY
Pn status
needs-verification