MOCHA T1 55G TACTILE PLATE MOUNT

Name: Durock MOCHA T1 55G TACTILE PLATE MOUNT
Brand: Durock
SKU: MOCHA T1 55G TACTILE PLATE MOUNT
Price: 0.3 USD
Availability: InStock

Aktiivne

Durock Mocha T1 55g Tactile Plate Mount Switch

Part of Durock's 2025 Full POK Mocha series 55g actuation force 62g bottom out force 2.0mm pretravel 3.8mm total travel Optimized POM stem POK top and bottom housing Removable light diffuser Housing in Pantone's 2025 color of the year, Mocha Mousse Also available in linear - Mocha Silk

Uurimismärkmed

1. What this is

Durock Mocha T1 55g Tactile Plate Mount Switch is a mechanical keyboard switch from Durock. It is tactile, 55g, 3-pin (plate mount).

2. Spec decode (from product name)

Switch type: tactile
Actuation force: 55g
Mount: 3-pin (plate mount)

3. Compatibility & use

Standard MX-style keyboard switch. Choose by feel (linear/tactile/clicky), actuation force, and sound (silent vs standard); this is a 3-pin plate-mount switch (needs a plate). Hot-swap or solder depending on your board.

4. Data-quality note

The switch type, force, and/or mount are decoded from the product name (the standard way keyboard switches are specified). Confirm exact spring curve, travel, and housing/stem material against the manufacturer's spec if precision matters. (Note: some of these rows are catalogued under a generic push-button/arcade-button category in the source data; the correct device class is keyboard switch, recorded in the specs above.)

5. Sources

Durock product page / keyboard-switch community databases
Distributor / vendor listing — search the exact switch name

Allikas

Durock Durock Mocha T1 55g Tactile Plate Mount Switch — keyboard-switch spec

Spetsifikatsioonid

Actuation Force The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).	55g
Device class	mechanical keyboard switch
Enriched by	keyboard-decoder-2026-08-12
Mount	3-pin (plate mount)
Pn status	decoded
Product type	Keyboard Switches
Series description	Durock mechanical keyboard switch (tactile)
Shopify id	9794759393580
Switch type	tactile
Vendor	Durock

Paigalduse kiirjuhend

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Mõõtmed

Veaotsing

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.