E79-00A

Activo

ZF E79-00A

ZF E79-00A — ZF E79-00A

Imagen de la serie: el vendedor la utiliza para 4 otras piezas también, por lo que puede no mostrar esta versión exacta.

Pushbutton Switches 10A DPDT MOM QC TERM

Notas de Investigación

1. What this is

E79-00A ("ZF E79-00A") is catalogued as a push-button / switch device from ZF.

2. What we know

  • Manufacturer: ZF
  • Category: push-button / switch device
  • Part number / name: E79-00A — ZF E79-00A
  • ZF (Cherry/ZF) — snap-action, sensor, and specialty switches

3. How to identify / order the exact part

The full specifications for this part are not machine-decodable from the data we hold. To confirm the exact configuration (contacts, rating, colour, mounting, protocol), search the ZF catalog for this part number on the manufacturer site or a distributor (DigiKey / Mouser / RS).

4. Data-quality note

This page is generated from the catalogued manufacturer, category, and product name. Per our keep-and-document policy we publish a page for every part we hold and state plainly what is known versus what needs verification, rather than deleting the row or inventing specs. Flagged needs-verification.

5. Sources

  • ZF product catalog — search "E79-00A" / "ZF E79-00A"

Fuente
  1. ZF E79-00A — distributor/catalog

Especificaciones

Device class
push-button
Enriched by
generic-fallback-2026-08-12
Lead time
140 Days
Mouser part number
540-E79-00A
Pn status
needs-verification
Rohs status
RoHS Compliant

Referencia rápida de instalación

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensiones

Solución de problemas

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Fotos y Dibujos

Imágenes: mouser.com

Especificaciones rápidas

Device class
push-button
Enriched by
generic-fallback-2026-08-12
Lead time
140 Days
Mouser part number
540-E79-00A
Pn status
needs-verification