Siemens · SIRIUS ACT Serie

3SU1132-0AB50-1BA0

Activo
UL CSA CE

SIRIUS ACT Blue Illuminated Flush 24V

Número de pieza: 3SU1 - 1 - 1BA0
Siemens SIRIUS ACT Serie Introduced circa 2013

Siemens SIRIUS ACT illuminated blue flush.

Aplicaciones comunes

Blue illuminated for reset/acknowledge. Metal front ring.

Research Notes

1. Overview

The catalog stored this SKU as 3SU1132-0AB50-1BA1 — invalid (no genuine SIRIUS ACT suffix ends in "1"). The corrected part, 3SU1132-0AB50-1BA0, is confirmed genuine directly from Classic Automation's product page: "ILLUMINATED PUSHBUTTON, MOM, BLU, FLUSH," Color: Blue, Button Style: Flush, Operation: Momentary. RS Components independently lists it as "SIRIUS ACT Illuminated Blue Flat Push Button Complete Unit, SPNO, 22mm Momentary Screw." Same SIRIUS ACT 3SU1 complete-device family as #335 (red): 22mm round, plastic + metal front ring, flush, momentary, integral 24V AC/DC LED, 1 NO, screw terminal.

2. User Sentiment

No forum/community discussion — routine commodity industrial part. Distributor listings (RS Components, Classic Automation, Heitek, eibabo) are neutral spec-sheet entries.

3. Real-World Applications

22mm panel pushbutton for machine HMI/control cabinets. Per IEC 60204-1 convention, BLUE denotes a "mandatory action" function — commonly a reset-to-a-specific-state command where no other reserved color applies. The illuminated cap also serves as a status/prompt indicator.

4. Technical Specifications

  • Corrected MLFB: 3SU1132-0AB50-1BA0 (stored "-1BA1" invalid; trailing digit corrected 1→0)
  • Color: Blue — 0AB50 confirmed directly via Classic Automation ("BLU"/"Blue") and RS Components ("Blue"); consistent with family anchors 0AB20=Red, 0AB30=Yellow, 0AB40=Green, 0AB60=White
  • Contact: 1 NO (function "B"); Voltage: 24V AC/DC (3SU1132 class)
  • Illumination: Yes, integral LED; Actuator: Flush, momentary
  • Front ring: Metal; Terminal: Screw; Protection: IP66/IP67 (SIRIUS ACT family rating)
  • Stored catalog color "Blue" is CORRECT — matches 0AB50 authoritatively.

5. Ordering & Compatibility

Genuine part confirmed by Classic Automation, RS Components, Siemens' teddatasheet index ("Data sheet 3SU1102-0AB50-1BA0"), and a live Siemens Industry Mall WW page for the exact MLFB. Sibling variants (3SU1152-0AB50-1BA0 via eibabo/Heitek, 3SU1102-0AB50-1BA0 via Kempston) confirm the same blue/flat/momentary/1NO pattern family-wide. Compatible with 3SU1400-series contact modules and 3SU1002 bare holders.

6. Known Issues

Same trailing-digit corruption as siblings: stored "-1BA1" should read "-1BA0". No contact-field or color-field conflict identified — stored color "Blue" is correct and the single-digit fix fully resolves the MLFB.


8 sources
  1. Siemens Part Number 3SU1132-0AB50-1BA0 - ILLUMINATED PUSHBUTTON, MOM, BLU, FLUSH (Color: Blue) — Classic Automation
  2. 3SU1132-0AB50-1BA0 | Siemens, SIRIUS ACT Illuminated Blue Flat Push Button Complete Unit, SPNO, 22mm Momentary Screw — RS Components (UK)
  3. 3SU1102-0AB50-1BA0 SIEMENS ILLUMINATED PUSHBUTTON, 22MM, ROUND, PLASTIC, BLUE, FLAT, MOMENTARY — Kempston Controls
  4. Siemens 3SU1152-0AB50-1BA0 | Push button 22mm, round, blue | Push button complete — Eibabo
  5. 3SU1152-0AB50-1BA0 - Push-buttons and pilot lights (Siemens) — Heitek Automation
  6. Data sheet 3SU1102-0AB50-1BA0 — Siemens Industry Support (teddatasheet index)
  7. Product Details - Industry Mall - Siemens WW - 3SU1132-0AB50-1BA0 — Siemens Industry Mall
  8. 3SU1132-0AB50-1BA0 - Siemens Product Information — Siemens Product Information

Especificaciones

Certifications
UL, CSA, CE
Color
Blue
Contact Configuration
1NO
Cutout Diameter
22mm
Illumination
Illuminated
IP Rating
IP67
LED Voltage
24V AC/DC
Material
Metal front ring

Referencia rápida de instalación

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensiones

Front 22mm cutout panel hole diameter Side panel contact ~45mm depth

Diagrama de cableado

L T 11 12 NO (open) press ↓

Solución de problemas

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Dónde comprar

Rango de precios

$44.55 — $83.44

en 2 distribuidores

Especificaciones rápidas

Certifications
UL, CSA, CE
Color
Blue
Contact Configuration
1NO
Cutout Diameter
22mm
Illumination
Illuminated

Lo que dicen los usuarios

+

“Blue illuminated for reset/acknowledge. Metal front ring.”

Reddit r/PLC 16 votos positivos Ver hilo →