GV2K031

Activo

Schneider Electric GV2K031 Emergency Stop Push Button

Schneider Electric GV2K031 — Schneider Electric GV2K031 Emergency Stop Push Button

Schneider Electric GV2K031 Emergency Stop Push Button The Schneider Electric GV2K031 is a emergency stop push button. It has a latching turn to release actuator type. The GV2K031 is used for thermal magnetic circuit breakers.

Notas de Investigación

1. What this is

GV2K031 is a Schneider Electric device — series not recognized.

2. Part-number decode

  • Series: Schneider (series not recognized)

3. Compatibility & ordering

Schneider's Harmony (22/16mm) and Square D Class 9001 (30mm) are the reference IEC/US command-switch ranges. Match by size (16/22/30mm), bezel material (metal XB4/ZB4 vs plastic XB5/ZB5), function (pushbutton/selector/indicator/E-stop), colour, illumination, and contact arrangement; cross-reference to Allen-Bradley 800F/800T, Siemens 3SU, IDEC HW, or Eaton M22 by the same attributes if needed.

4. Data-quality note

The exact Schneider series/configuration could not be confidently decoded from this part number. Kept and documented; flagged needs-verification.

5. Sources

  • Schneider Electric Harmony / Square D Class 9001 catalog (se.com)
  • Distributor listing (Rexel / Mouser / Newark) — search the exact part number

Verified distributor data (Mouser)

This part is carried by Mouser Electronics; the description and datasheet above come straight from the distributor's catalog, confirming and expanding the part-number decode above.


Fuente
  1. Schneider Electric — GV2K031 — se.com

Especificaciones

Datasheet url
https://www.mouser.com/datasheet/3/187/30/2cd43485f5a374abbf641f9007c25cb8a9b3e80f.pdf
Enriched by
schneider-decoder-2026-08-12
Manufacturer series
Schneider (series not recognized)
Mouser checked
2026-09-28
Mouser description
Motor & Motor Drive Accessories MAN-START PUSH BUTTON KIT IEC
Mouser matched
true
Pn status
verified
Product type
Emergency Stop Push Button
Series description
Schneider Electric control/switch device — exact series/config could not be decoded from this part number; kept and flagged for verification rather than guessed
Shopify id
8346500104505
Vendor
Schneider Electric

Referencia rápida de instalación

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensiones

Solución de problemas

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Fotos y Dibujos

Imágenes: cdn.shopify.com

Dónde comprar

Rango de precios

$30.81 — $30.81

from 1 seller in US dollars

Especificaciones rápidas

Datasheet url
https://www.mouser.com/datasheet/3/187/30/2cd43485f5a374abbf641f9007c25cb8a9b3e80f.pdf
Enriched by
schneider-decoder-2026-08-12
Manufacturer series
Schneider (series not recognized)
Mouser checked
2026-09-28
Mouser description
Motor & Motor Drive Accessories MAN-START PUSH BUTTON KIT IEC