QanBa 30mm Snap In Arcade Button. This button is very similar to the Sanwa OBSF-30 and is used in QanBa's Arcade Sticks and Fighsticks.
Research Notes
1. Overview
A Qanba-brand 30 mm snap-in arcade pushbutton (solid color) — Qanba's OBSF-30-style main-action button sold as OEM/replacement. Sanwa-clone form factor: 30 mm snap-in, built-in microswitch, solid opaque plunger. Budget alternative to genuine Sanwa OBSF-30; fits the same 30 mm cutouts.
2. Technical Specifications & Compatibility
See the structured specs on this page (diameter, mounting, plunger/finish, microswitch). These are standard arcade-button form factors — confirm the panel cutout (30 mm / 24 mm / 18 mm as applicable) and the snap-in vs screw-in mount for your panel thickness before ordering.
3. Sources
2 sources
- Qanba 30 mm Snap-In Arcade Pushbutton (Solid) — qanba.com
- Qanba 30 mm Snap-In Arcade Pushbutton (Solid) — www.slagcoin.com
Especificaciones
|
Arcade express id
|
755
|
|
Device type
|
Qanba 30mm snap-in arcade pushbutton (OBSF-30 form factor)
|
|
Diameter
|
30mm
|
|
Finish
|
Solid/opaque plunger
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Snap-in
|
|
Reference pn
|
Qanba 30mm snap-in (AX-755 is an Arcade Express catalog ID)
|
|
Weight kg
|
0.020000
|
Referencia rápida de instalación
Mounting: Snap-in buttons push into a 30mm hole from the top of the panel. Screw-in buttons thread from below and secure with a nut. Use 2-3mm acrylic, wood, or metal panel.
Wiring: Connect the microswitch terminals to your encoder or PCB. Common ground shared across all buttons. Quick-disconnect (0.110") terminals are standard on Japanese buttons.
Dimensiones
Solución de problemas
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Especificaciones rápidas
- Arcade express id
- 755
- Device type
- Qanba 30mm snap-in arcade pushbutton (OBSF-30 form factor)
- Diameter
- 30mm
- Finish
- Solid/opaque plunger
- Mounting Type
- Snap-in
