K-PRO-RED
ActivoKeychron K Pro Red Linear 50g
Keychron K Pro Red — Keychrons first in-house switch.
Aplicaciones comunes
Keychron now makes their own switches instead of using only Gateron. The K Pro Red is their 50g linear — factory lubed with improved housing tolerances. Hot-swappable in all Keychron Q and K Pro series keyboards. MX compatible. Keychron is positioning to control their full stack like Apple does with keyboards.
Notas de Investigación
1. Overview
The Keychron K Pro Red is a linear MX-style mechanical keyswitch manufactured by Gateron for Keychron — a smooth, factory-lubed linear (red stem, ~45–50 gf actuation) with 2 mm actuation / 4 mm total travel, a dustproof stem-wall design, and a 5-pin MX-compatible footprint for hot-swap boards. It's the stock/upgrade linear in many Keychron keyboards and a solid budget switch.
2. User Sentiment
Liked as a smooth, value linear that ships pre-lubed and works out of the box in Keychron's hot-swap boards. The dustproof stem wall and factory lube are appreciated at the price. As a Gateron-derived budget switch, refinement is "good for the money" versus premium linears; those wanting silence use the Keychron Silent K Pro instead.
3. Real-World Applications
Stock or replacement linear for Keychron (and other MX hot-swap) keyboards — general typing/gaming with a smooth light-medium press.
4. Technical Specifications
- Type: Linear, MX-style mechanical (Gateron-made)
- Actuation force: ~45–50 gf (listings vary; ~55 gf bottom-out)
- Travel: 2 mm actuation, 4 mm total
- Life: ~50 million actuations
- Stem/color: red stem; dustproof stem wall; factory-lubed
- Mount: 5-pin MX-compatible (hot-swap friendly)
5. Ordering & Compatibility
Sold in switch sets by Keychron; drops into standard MX hot-swap PCBs (5-pin) and takes MX keycaps. Family: K Pro Red (linear), Brown (tactile), Blue (clicky), plus the Silent K Pro variants. Compatible with Keychron's hot-swap boards and other MX hot-swap keyboards.
6. Known Issues
No major reliability issues. Practical notes: force spec varies slightly by listing (~45–50 gf actuation), budget-tier refinement/lube (fine for the price), and it's an MX contact linear (not magnetic/Hall-effect). For quiet operation choose the Silent K Pro.
Fuente
- Keychron K Pro Red Linear Switch Set (dustproof stem) — keychron.com
- Keychron K Pro Red — Gateron-made linear — switchmodders.com
Especificaciones
|
Actuation Force
The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).
|
~45-50g (listings vary; ~55g bottom-out)
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Red stem
|
|
Keycap compat
|
MX-compatible, 5-pin hot-swap
|
|
Mechanical Life
How many press cycles before mechanical failure. Higher is better — 10M cycles at 100 presses/day = 274 years.
|
50,000,000 cycles
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
MX-compatible hot-swap
|
|
Switch type
|
Linear (MX-style contact, Gateron-made, factory-lubed, dustproof stem)
|
|
Travel Distance
How far the button moves when pressed. Shorter = faster response. Sanwa 0.85mm is extremely short for competitive gaming.
|
2mm actuation, 4mm total
|
Referencia rápida de instalación
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensiones
Solución de problemas
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Dónde comprar
Rango de precios
$44.64 — $83.94
across 2 sellers in US dollars
Especificaciones rápidas
- Actuation Force
- ~45-50g (listings vary; ~55g bottom-out)
- Color
- Red stem
- Keycap compat
- MX-compatible, 5-pin hot-swap
- Mechanical Life
- 50,000,000 cycles
- Mounting Type
- MX-compatible hot-swap
Lo que dicen los usuarios
“Keychron now makes their own switches instead of using only Gateron. The K Pro Red is their 50g linear — factory lubed with improved housing tolerances. Hot-swappable in all Keychron Q and K Pro serie”
Más información
Grados de protección IP explicados
Qué significan IP65, IP66, IP67, IP69K para su aplicación
Guía 22mm vs. 30mm
¿Qué tamaño de corte de panel necesita?
Bloques de contacto: NO vs. NC
Cómo elegir y cablear bloques de contacto
Herramienta buscador de botones
Encuentre el botón correcto por tipo, tamaño y color