1435MA

Activo

Hammond Manufacturing 1435MA

Hammond Manufacturing 1435MA — Hammond Manufacturing 1435MA

Imagen de la serie: el vendedor la utiliza para 8 otras piezas también, por lo que puede no mostrar esta versión exacta.

Push-button Enclosures Pushbutton Encl - 1 PB x 22.5mm - 3.50 x 3.25 x 2.75" - Steel/Gray

Notas de Investigación

1. What this is

1435MA ("Hammond Manufacturing 1435MA") is catalogued as a push-button / switch device from Hammond Manufacturing.

2. What we know

  • Manufacturer: Hammond Manufacturing
  • Category: push-button / switch device
  • Part number / name: 1435MA — Hammond Manufacturing 1435MA
  • Hammond Manufacturing — electronics ENCLOSURES, racks, and transformers (a Hammond part is usually an enclosure/box, not a switch)

3. How to identify / order the exact part

The full specifications for this part are not machine-decodable from the data we hold. To confirm the exact configuration (contacts, rating, colour, mounting, protocol), search the Hammond Manufacturing catalog for this part number on the manufacturer site or a distributor (DigiKey / Mouser / RS).

4. Data-quality note

This page is generated from the catalogued manufacturer, category, and product name. Per our keep-and-document policy we publish a page for every part we hold and state plainly what is known versus what needs verification, rather than deleting the row or inventing specs. Flagged needs-verification.

5. Sources

  • Hammond Manufacturing product catalog — search "1435MA" / "Hammond Manufacturing 1435MA"

Verified distributor data (Mouser)

This part is carried by Mouser Electronics; the description and datasheet above come straight from the distributor's catalog, confirming and expanding the part-number decode above.


Fuente
  1. Hammond Manufacturing 1435MA — distributor/catalog

Especificaciones

Datasheet url
https://www.mouser.com/datasheet/3/222/1/1435.pdf
Device class
push-button
Enriched by
generic-fallback-2026-08-12
Lead time
16 Days
Mouser checked
2026-09-28
Mouser description
Push-button Enclosures Pushbutton Encl - 1 PB x 22.5mm - 3.50 x 3.25 x 2.75" - Steel/Gray
Mouser matched
true
Mouser part number
546-1435MA
Pn status
verified
Rohs status
RoHS Compliant

Referencia rápida de instalación

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensiones

Solución de problemas

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Fotos y Dibujos

Imágenes: mouser.com

Especificaciones rápidas

Datasheet url
https://www.mouser.com/datasheet/3/222/1/1435.pdf
Device class
push-button
Enriched by
generic-fallback-2026-08-12
Lead time
16 Days
Mouser checked
2026-09-28