LUCIFER HE

Activo

Geon Lucifer HE Switch

Geon LUCIFER HE — Geon Lucifer HE Switch

Geon Lucifer HE Switches are hall effect switches that pushes the boundary toward affordability of hall effect keyboards. Made compatible with Venom HE PCB's and other keyboards supporting the Gateron KS-20 footprint.  Geon Lucifer HE Switches Feature: 18 included in each pack Linear Hall Effect Top Housing: PC Bottom Housing: Nylon Stem: POM Spring: 15.8mm, Single-stage Pre-travel: 0.1 ~ 3.7mm (Analog) Total Travel: 3.8mm Bottom-out Force: 45.0g Magnetic Flux Initial: 160Gs Bottom-out: 720Gs 2-Pin Lubed Manufactured by Graingold Price: $0.28 per switch Includes: 18 Geon Lucifer HE Switches

Notas de Investigación

1. What this is

Geon Lucifer HE Switch is a mechanical keyboard switch from Geon.

2. Spec decode (from product name)

  • Type/force not stated in the product name — see the manufacturer spec.

3. Compatibility & use

Standard MX-style keyboard switch. Choose by feel (linear/tactile/clicky), actuation force, and sound (silent vs standard); 5-pin PCB-mount switches also fit plate-mount boards. Hot-swap or solder depending on your board.

4. Data-quality note

This is identified as a Geon keyboard switch, but the type/force were not stated in the name — confirm the full spec against the manufacturer. Flagged needs-verification. (Note: some of these rows are catalogued under a generic push-button/arcade-button category in the source data; the correct device class is keyboard switch, recorded in the specs above.)

5. Sources

  • Geon product page / keyboard-switch community databases
  • Distributor / vendor listing — search the exact switch name

Fuente
  1. Geon Geon Lucifer HE Switch — keyboard-switch spec

Especificaciones

Device class
mechanical keyboard switch
Enriched by
keyboard-decoder-2026-08-12
Pn status
needs-verification
Product type
Switches
Series description
Geon mechanical keyboard switch
Shopify id
7493799772225
Vendor
Geon

Referencia rápida de instalación

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensiones

Solución de problemas

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Fotos y Dibujos

Imágenes: cdn.shopify.com

Dónde comprar

Rango de precios

$5.95 — $5.95

from 1 seller in US dollars

Especificaciones rápidas

Device class
mechanical keyboard switch
Enriched by
keyboard-decoder-2026-08-12
Pn status
needs-verification
Product type
Switches
Series description
Geon mechanical keyboard switch