52PA8-BLACK

Activo

Furnas 52PA8-BLACK Push Button

Furnas 52PA8-BLACK — Furnas 52PA8-BLACK Push Button

Furnas 52PA8-BLACK Push Button The Furnas 52PA8-BLACK is a push button.

Notas de Investigación

1. What this is

52PA8-BLACK is a Square D Square D device — line not recognized.

2. Part-number decode

  • Series: Square D Square D (line not recognized)
  • Type: command switch

3. Compatibility & ordering

Square D (Schneider's US brand) makes the Class 9001 30mm heavy-duty command switches and Harmony devices. Match by type, actuation, illumination, sealing, and mounting, then use the manufacturer datasheet to confirm the exact contact and termination encoded in the part number.

4. Data-quality note

The exact Square D product line/configuration could not be confidently decoded from this part number. Kept and documented; flagged needs-verification.

5. Sources

  • Square D product catalog (se.com)
  • Distributor listing (DigiKey / Mouser) — search the exact part number

Fuente
  1. Square D — 52PA8-BLACK — se.com

Especificaciones

Enriched by
squared-decoder-2026-08-12
Manufacturer series
Square D (line not recognized)
Mouser checked
2026-09-28
Mouser matched
false
Pn status
needs-verification
Product type
Push Button
Series description
Square D control device — exact series/config could not be decoded from this part number; kept and flagged for verification
Shopify id
8345237324089
Vendor
Furnas

Referencia rápida de instalación

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensiones

Solución de problemas

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Fotos y Dibujos

Imágenes: cdn.shopify.com

Dónde comprar

Rango de precios

$20.54 — $20.54

from 1 seller in US dollars

Especificaciones rápidas

Enriched by
squared-decoder-2026-08-12
Manufacturer series
Square D (line not recognized)
Mouser checked
2026-09-28
Mouser matched
false
Pn status
needs-verification