FLIC-TWIST
ActivoFlic Twist Smart Dimmer Button
The Flic Twist combines a push button with a twist dial in a single wireless controller. Press to trigger on/off actions, twist to dim lights or adjust volume. BLE connectivity with Flic Hub integration.
Aplicaciones comunes
A versatile smart home controller that replaces traditional dimmer switches and volume knobs. Mount on a wall or place on a bedside table. The twist action provides intuitive analog control for dimming, volume, thermostat adjustment, or blinds. Pairs with Flic Hub for full smart home integration.
Apertura y modificabilidad
Proprietary BLE — requires Flic Hub for automation. Home Assistant integration via Hub API. Cannot flash custom firmware.
Especificaciones
|
Battery Life
Expected battery life under normal use. BLE buttons typically last 1-2 years on a coin cell.
|
2 years (typical)
|
|
Battery Type
The battery used. CR2032 = common coin cell, easy to replace. AAA = higher capacity. USB-C = rechargeable.
|
CR2032 (x2)
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
FCC, CE, Bluetooth SIG
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
White
|
|
Dimensions
|
50mm diameter x 25mm
|
|
Gestures
|
Press, twist (rotary encoder, 24 detents)
|
|
Smart Home Integrations
Compatible smart home platforms and voice assistants.
|
HomeKit, Alexa, Google Home, Home Assistant, IFTTT
|
|
Protocol
The wireless communication standard. BLE = short range, phone direct. Zigbee = mesh network, needs hub. Z-Wave = mesh, needs hub. WiFi = direct, higher power.
|
BLE 5.0 (Bluetooth Low Energy)
|
|
Wireless Range
Maximum wireless range in open air. Walls and interference reduce this significantly.
|
50m (line of sight)
|
|
Waterproof rating
|
Not waterproof (indoor use)
|
|
Weight
|
35g
|
Las especificaciones con este icono están vinculadas a la página fuente original del fabricante
Referencia rápida de instalación
Setup: Pair with your hub or phone via BLE 5.0 (Bluetooth Low Energy). Most smart buttons support single press, double press, and long press for three different actions.
Battery: Uses CR2032 (x2) battery. Expected life: 2 years (typical). Low battery notification via the app.
Dimensiones
Solución de problemas
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Dónde comprar
Especificaciones rápidas
- Battery Life
- 2 years (typical)
- Battery Type
- CR2032 (x2)
- Certifications
- FCC, CE, Bluetooth SIG
- Color
- White
- Dimensions
- 50mm diameter x 25mm
Lo que dicen los usuarios
“Works well with Home Assistant and other platforms. Battery life is as advertised. The form factor is compact enough to place anywhere without looking out of place.”
Más información
Fuentes de datos
Especificaciones y datos de producto obtenidos de las siguientes referencias.