Imagen de la serie: el vendedor la utiliza para 28 otras piezas también, por lo que puede no mostrar esta versión exacta.
Pushbutton Switches E30 BUTTON STANDARD MARKINGS
Notas de Investigación
1. What this is
E30KB167 is an Eaton E30 30.5mm HEAVY-DUTY modular command device (Cutler-Hammer heritage; E30K* = collar/operator/contact components for 30.5mm control).
2. Part-number decode
- Series: E30
- Panel cutout: 30.5mm
- Type: operator/collar/block
- Construction: modular (operator, contact block(s), and mounting are separate parts)
3. Compatibility & ordering
Eaton's M22 (RMQ-Titan, 22mm) and E30 / 10250T (30.5mm heavy-duty) are its principal command-switch ranges. As an M22/E30 modular device, the operator/actuator, the contact or LED block(s), and the mounting adapter are ordered separately — a common ordering error is assuming a stored contact is included. Confirm you have all the pieces for a complete device. Match by size (22 / 30.5mm), function (pushbutton/selector/indicator/E-stop), color, illumination, and contact arrangement; cross-reference to Schneider Harmony, Allen-Bradley 800F/800T, Siemens 3SU, or IDEC HW by the same attributes if needed.
4. Data-quality note
The Eaton series, size, and component type are decoded from the part number (grounded in Eaton's Vol.7 catalog and distributor listings). The exact color and contact arrangement depend on the remaining digits and the sub-family — confirm against the Eaton datasheet for a precise order (not guessed here).
5. Sources
- Eaton control-components catalog (Vol.7) / RMQ-Titan M22 & 10250T (eaton.com)
- Distributor listing (Newark / Mouser) — search the exact part number
Fuente
- Eaton — E30KB167 — eaton.com
Especificaciones
|
Component type
|
operator/collar/block
|
|
Enriched by
|
eaton-decoder-2026-08-12
|
|
Lead time
|
0 Days
|
|
Manufacturer series
|
E30
|
|
Modular
|
true
|
|
Mouser part number
|
504-E30KB167
|
|
Panel cutout
|
30.5mm
|
|
Pn status
|
decoded
|
|
Rohs status
|
|
|
Series description
|
Eaton E30 30.5mm HEAVY-DUTY modular command device (Cutler-Hammer heritage; E30K* = collar/operator/contact components for 30.5mm control)
|
Referencia rápida de instalación
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensiones
Solución de problemas
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Dónde comprar
Especificaciones rápidas
- Component type
- operator/collar/block
- Enriched by
- eaton-decoder-2026-08-12
- Lead time
- 0 Days
- Manufacturer series
- E30
- Modular
- true
Más información
Grados de protección IP explicados
Qué significan IP65, IP66, IP67, IP69K para su aplicación
Guía 22mm vs. 30mm
¿Qué tamaño de corte de panel necesita?
Bloques de contacto: NO vs. NC
Cómo elegir y cablear bloques de contacto
Herramienta buscador de botones
Encuentre el botón correcto por tipo, tamaño y color